|
|
| Position wanted: |
Power plant design Professional |
| Job category: |
ConsultancyEngineering |
| Objective and Resume Summary: |
|
Gas Turbine Knowledge : Have very good knowledge about the Siemens Gas turbines (V94.3, V94.3A, V94.2). Have hands on experience about the layout engineering for Gas turbine and auxiliaries. Having very good exposure about the Fuel oil and Fuel Oil Gas system required for Gas Turbine. Having working experience with GE ( Frame 6 and 9E) gas turbine.
Exposure in Rotating Equipment: Having hands on exposure on the pump sizing and selection. Have exposure on the seal system for the pumps. Have good understating of the API codes for pumps / seal system
Pipe sizing: Having very good hands on exposure for calculating pipe size. Have exposure about the ASME B31.1 code.
Equipment / piping Layout : Equipment planning inside the building and the outside building. Erection and maintenance concept preparation is one of the very important role of Layout. This concept is used as basis for preparing the detailed erection and Manual concept. Piping corridor and the cable tray corridor planning is being done by Layout. Pipe bridge / Sleeper planning is also a major activity.
Area Planning : Planned for equipment and piping for the following area
Fuel oil and Fuel gas area based on NFPA codes.
Piping between DM water tank to the consumer.
Closed Cooling water system
Aux. Cooling water system
Bid Evaluation and commercial loading : On getting the offer from various vendors, evaluation report to be made based on the some important criteria ( i.e Power out put, Heat rate, Cost of the equipment. Etc.). Commercial loading has been made where the technical discrepancies are found and this loading has been added to the total cost of the m/c.
Heat Balance Diagram: Preparation of Heat balance diagram by using Gate Cycle package. Optimisation of cycle by changing the different parameter of cycle.
System Write-up : Preparation of brief description about the system is system write –up where control philosophy are also describe to some extent and the no. of pumps and tanks are mentioned there.
Flow diagram: As a system architect, the preparation of flow diagrams is also a prime responsibility. Flows diagram is nothing but the graphical representation of the system write –up.
Auxiliary Power list: Identifying the equipment which will be running during various stages of operation of the plant. Calculate the total power consumption of the operating equipment which has to be given during proposal stages.
Planning for fire protection: Equipment has to be placed accordingly to satisfy the fire zone requirement. Fence to be made accordingly. This planning has been done based on NFPA and other code. Dyke wall calculation, Location of transformer and catch pit sizing is the major activity.
Plot plan / External works drawing: Preparation of Plot plan, under ground facility planning.
Achievements
Doosan India has increased the scope work for the Layout engineering. Doosan Head quarter has agreed to increase this scope depending on my expertise.
Deputed to Siemens Office at Germany for Planning of Gas and Steam turbine building for a single shaft machine with a newly developed Gas Turbine (Gas turbine out put around 380MW).
Deputed to Belgium Site office for co-ordination between site office and design office.
Attended various kick-off meetings at Germany office.
Visited various construction site as Lender’s engineer.
Attended various Bid evaluation meetings
Presently working as Project Manager.
Exposure in Professional Software / International Codes
Hands on experience in PDS
Equipment modelling
HVAC modelling
Have very good understanding of the following codes
API600, API650, API682, API589, API6D, ASME B31.1, ASME B16.6, B16.9, B16.11, B16.34 etc.
Hands on experience in Microstation
Hands on experience in Gate Cycle
Exposure in Software
MS Word
MS Excel
Experience / Projects
1. Company Electrowatt Engineering, Muscat.
Duration From 14th March 08 to till date
Designation Sr. Mechanical Engineer
Project
Al Ghail Power Project. This project is with open cycle configuration with Two Gas Turbine. I am acting as Mechanical Team Leader for the Same project.
Al Burj Water Injection Project. This project iswater injection project which inject the water in a present oil field.. I am acting as Mechanical Team Leader for the Same project.
2. Company Doosan Engineering and Services India.
Duration From 1st June 2007 to 14th March’08
Designation Manager
Project
Barka- II at OMAN. This project is with Multi shaft configuration with Three Gas Turbine, Three nos. of double pressure HRSG and Two Steam Turbine. I am acting as Mechanical Team Leader for the Same project.
Daharki at Pakisthan. This project is with Multi shaft configuration with one Gas Turbine one nos. of HRSG and one Steam Turbine. I am acting as Layout team Leader for the Same project.
Proposal for ODIN- Thailand. This project is with Supercritical boilers with 700 mw capacity project.
Proposal for Krishnapatnam- India. This project is with Supercritical boilers with 2x800 mw capacity project.
3. Company Siemens Power Engineering Pvt. Ltd.
Duration From April 2001 to 31st May’2007
Designation Manager
Project
Irsching project at Germany. This project is with single-shaft configuration with one (NGF50) GT, One nos. of triple pressure HRSG and one Steam Turbine. I am acting as Project Manager for the Same project.
Knapsack Combined Cycle Power project at Germany. This project is with Multi-shaft configuration with two (V94.3A) GTs, Two nos. of triple pressure HRSG and one Steam Turbine. Worked as Lead Layout Engineer.
Geregu Power project at Nigeria. This project is with Open cycle configuration with three (V94.2) GTs, Worked as Lead Layout Engineer.
Kemerton Power project at Australia. This project is with Open cycle configuration with Two (V94.2) GTs,. Worked as Lead Layout Engineer
Antwerpen project at Belgium. This project is with Single Shaft configuration with One (V94.3A) GT, One ST and One HGRS. Worked as Layout Engineer.
Al Shuweihat CCPP project near Abu Dhabi. This is aMulti Shaft configuration plant with Five (V94.3A) GTs, Five HRSGs and Two STs. Back Pressure STs are provived in this plant. Exhaust Steam is supplied to the De-salination Plant. Worked as Layout Engineer.
Worked as Plant Layout Engineer in Panglime Project at Malaysia .
4. Company L & T – Sargent & Lundy
Power Plant consultant (Joint Venture – L&T of India and Sargent & Lundy of USA) (Upto April’2001)
Duration From April 1997 to March 2001
Designation Executive – Proposal Engineering / System Engg.
Project
Proposal Lead Engineer for AES Kelanitissa , Srilanka (173 Mw CCPP). This was the first power plant which L&T did out side of India.
Dhubaran Power project – Madhya Pradesh : Worked as also proposal lead.
Worked as proposal engineer for BALCO power project - Orissa.
Many other Power project as proposal engineer.
IPCL –Gandhar Co-generation Power Plant. Assisted Project Co-ordinator for Co-ordination Job. Responsible for P&ID diagrams. This plant is a Open Cycle configuration with Two GTs (GE supplied) and Two HRSG (L&T supplied). Steam is taken by IPCL Gandhar. Worked as Project Engineer
5. Company Desein Pvt. Ltd.
Power Plant Consultancy Firm (Upto March 1997))
Duration From 1995 to March 1997
Designation Engineer
Project
Akrimota 125MW coal based power plant. This is a Green Field Thermal Power Station. Worked as Project Engineer
AECO 2x30 MW project at Ahmedabad. Worked as Project Engineer.
|
| Skills: |
Manager, Power Plant Consultancy sector |
| Known languages (and levels): |
English-Very GoodHindi-Good
|
| Type of Employment wanted: |
Full Time
|
| Minimum Yearly Salary in Numbers: |
Unspecified
|
| Current Location: |
Oman, Muscat |
| Education History, Qualifications & other additional information: |
| Level of Education: |
Bachelor
|
• Completed 10th Std. in 1988 from West Bengal Board of Secondary Education with 1st Div.
• Completed 12th Std. in 1990 from West Bengal Council of Higher Secondary Education with 1st Div..
• Completed Bachelor of Engineering in Mechanical from North Bengal University in 1994 with 1st Div.
|
| Work History & Experience: |
| Years of Work Experience: |
10 to 15 Years |
Gas Turbine Knowledge : Have very good knowledge about the Siemens Gas turbines (V94.3, V94.3A, V94.2). Have hands on experience about the layout engineering for Gas turbine and auxiliaries. Having very good exposure about the Fuel oil and Fuel Oil Gas system required for Gas Turbine. Having working experience with GE ( Frame 6 and 9E) gas turbine.
Exposure in Rotating Equipment: Having hands on exposure on the pump sizing and selection. Have exposure on the seal system for the pumps. Have good understating of the API codes for pumps / seal system
Pipe sizing: Having very good hands on exposure for calculating pipe size. Have exposure about the ASME B31.1 code.
Equipment / piping Layout : Equipment planning inside the building and the outside building. Erection and maintenance concept preparation is one of the very important role of Layout. This concept is used as basis for preparing the detailed erection and Manual concept. Piping corridor and the cable tray corridor planning is being done by Layout. Pipe bridge / Sleeper planning is also a major activity.
Area Planning : Planned for equipment and piping for the following area
Fuel oil and Fuel gas area based on NFPA codes.
Piping between DM water tank to the consumer.
Closed Cooling water system
Aux. Cooling water system
Bid Evaluation and commercial loading : On getting the offer from various vendors, evaluation report to be made based on the some important criteria ( i.e Power out put, Heat rate, Cost of the equipment. Etc.). Commercial loading has been made where the technical discrepancies are found and this loading has been added to the total cost of the m/c.
Heat Balance Diagram: Preparation of Heat balance diagram by using Gate Cycle package. Optimisation of cycle by changing the different parameter of cycle.
System Write-up : Preparation of brief description about the system is system write –up where control philosophy are also describe to some extent and the no. of pumps and tanks are mentioned there.
Flow diagram: As a system architect, the preparation of flow diagrams is also a prime responsibility. Flows diagram is nothing but the graphical representation of the system write –up.
Auxiliary Power list: Identifying the equipment which will be running during various stages of operation of the plant. Calculate the total power consumption of the operating equipment which has to be given during proposal stages.
Planning for fire protection: Equipment has to be placed accordingly to satisfy the fire zone requirement. Fence to be made accordingly. This planning has been done based on NFPA and other code. Dyke wall calculation, Location of transformer and catch pit sizing is the major activity.
Plot plan / External works drawing: Preparation of Plot plan, under ground facility planning.
Achievements
Doosan India has increased the scope work for the Layout engineering. Doosan Head quarter has agreed to increase this scope depending on my expertise.
Deputed to Siemens Office at Germany for Planning of Gas and Steam turbine building for a single shaft machine with a newly developed Gas Turbine (Gas turbine out put around 380MW).
Deputed to Belgium Site office for co-ordination between site office and design office.
Attended various kick-off meetings at Germany office.
Visited various construction site as Lender’s engineer.
Attended various Bid evaluation meetings
Presently working as Project Manager.
Exposure in Professional Software / International Codes
Hands on experience in PDS
Equipment modelling
HVAC modelling
Have very good understanding of the following codes
API600, API650, API682, API589, API6D, ASME B31.1, ASME B16.6, B16.9, B16.11, B16.34 etc.
Hands on experience in Microstation
Hands on experience in Gate Cycle
Exposure in Software
MS Word
MS Excel
Experience / Projects
1. Company Electrowatt Engineering, Muscat.
Duration From 14th March 08 to till date
Designation Sr. Mechanical Engineer
Project
Al Ghail Power Project. This project is with open cycle configuration with Two Gas Turbine. I am acting as Mechanical Team Leader for the Same project.
Al Burj Water Injection Project. This project iswater injection project which inject the water in a present oil field.. I am acting as Mechanical Team Leader for the Same project.
2. Company Doosan Engineering and Services India.
Duration From 1st June 2007 to 14th March’08
Designation Manager
Project
Barka- II at OMAN. This project is with Multi shaft configuration with Three Gas Turbine, Three nos. of double pressure HRSG and Two Steam Turbine. I am acting as Mechanical Team Leader for the Same project.
Daharki at Pakisthan. This project is with Multi shaft configuration with one Gas Turbine one nos. of HRSG and one Steam Turbine. I am acting as Layout team Leader for the Same project.
Proposal for ODIN- Thailand. This project is with Supercritical boilers with 700 mw capacity project.
Proposal for Krishnapatnam- India. This project is with Supercritical boilers with 2x800 mw capacity project.
3. Company Siemens Power Engineering Pvt. Ltd.
Duration From April 2001 to 31st May’2007
Designation Manager
Project
Irsching project at Germany. This project is with single-shaft configuration with one (NGF50) GT, One nos. of triple pressure HRSG and one Steam Turbine. I am acting as Project Manager for the Same project.
Knapsack Combined Cycle Power project at Germany. This project is with Multi-shaft configuration with two (V94.3A) GTs, Two nos. of triple pressure HRSG and one Steam Turbine. Worked as Lead Layout Engineer.
Geregu Power project at Nigeria. This project is with Open cycle configuration with three (V94.2) GTs, Worked as Lead Layout Engineer.
Kemerton Power project at Australia. This project is with Open cycle configuration with Two (V94.2) GTs,. Worked as Lead Layout Engineer
Antwerpen project at Belgium. This project is with Single Shaft configuration with One (V94.3A) GT, One ST and One HGRS. Worked as Layout Engineer.
Al Shuweihat CCPP project near Abu Dhabi. This is aMulti Shaft configuration plant with Five (V94.3A) GTs, Five HRSGs and Two STs. Back Pressure STs are provived in this plant. Exhaust Steam is supplied to the De-salination Plant. Worked as Layout Engineer.
Worked as Plant Layout Engineer in Panglime Project at Malaysia .
4. Company L & T – Sargent & Lundy
Power Plant consultant (Joint Venture – L&T of India and Sargent & Lundy of USA) (Upto April’2001)
Duration From April 1997 to March 2001
Designation Executive – Proposal Engineering / System Engg.
Project
Proposal Lead Engineer for AES Kelanitissa , Srilanka (173 Mw CCPP). This was the first power plant which L&T did out side of India.
Dhubaran Power project – Madhya Pradesh : Worked as also proposal lead.
Worked as proposal engineer for BALCO power project - Orissa.
Many other Power project as proposal engineer.
IPCL –Gandhar Co-generation Power Plant. Assisted Project Co-ordinator for Co-ordination Job. Responsible for P&ID diagrams. This plant is a Open Cycle configuration with Two GTs (GE supplied) and Two HRSG (L&T supplied). Steam is taken by IPCL Gandhar. Worked as Project Engineer
5. Company Desein Pvt. Ltd.
Power Plant Consultancy Firm (Upto March 1997))
Duration From 1995 to March 1997
Designation Engineer
Project
Akrimota 125MW coal based power plant. This is a Green Field Thermal Power Station. Worked as Project Engineer
AECO 2x30 MW project at Ahmedabad. Worked as Project Engineer.
|
|
|
|
