|
|
| Position wanted: |
Senior Instrument design engineer |
| Job category: |
ConstructionConsultancyEngineeringGas IndustryOil Industry |
| Preferred Location: |
Italy |
| Objective and Resume Summary: |
|
At this moment I work like checker Instruments and control systems engineer at „SKEMA TOZZI” company in Ravenna, Italy.
I`m involved in the experimental project, an artifical island created in Caspian see.
The project comprise a combination of both offshore and onshore processing facilities, oil and gas processing, located along the Caspian Coast on the North-Easter n Area and export trunklines.
At „Skema Tozzi”, I check the project of all HVAC systems which will be implemented in ITR, LER, HVAC Room, LV Emergency Room, HV Emergency Room, Transformer Room, MCC and Battery Room.
Before I’ve worked, at ENI Tecnomare, in Milan Italy, for six months at the same project, like checker instrument and control design engineer.
My work has included verifying and modifying in case of: P&ID`s, Field Instrument Data Sheets, Hook-up Drawings, MTO, I/O list data base, C&E Diagrams, Panel Termination Diagrams and Instrument UPS Distribution Block Diagrams for Logistic Support Area, Located in the offshore land. For to check all these documents I have needed to now the client`s general specification requirements for the instruments, base on the applicable standards, the Fire & Gas detection, Emergency Shut Down & Depressurisation Philosophy, comply with client’s general specification,
Beginning with April 2006 up to January 2008 I have worked at INITEC-Technical Reunidas-Madrid Spain like Instruments and control system design unit engineer.
This company has achieved gas plants projects EPCM for Hawyah-Saudi Arabia.
In this company I was the head of a design Instrumentation team composed by two instrument engineers and two designers. I was responsible for the design project of two plants: A Gas Treatment plant (GT6) and a Thermal Oxidizer.
My work was the following:
- to verify the P&IDs regarding the instruments control loops (the control loops caring the signals through the Foundation Fieldbus) and instruments interlocking system (using analog/digital hart protocol signals).
-to take part into HAZOP meetings.
-to establish the segregation of the smart field instruments per Foundation fieldbus segments.
-to create the I/O list module F&G/ESD/DCS.
-to calculate the voltage drop on each segment (Segments validation)
-to segregate the field hart protocol instruments into analog/digital junction boxes.
-to emplace the JBs into layout sketches, ensuring the guide line for the designers.
-to create the field instruments data sheets in Smart Plant Instrumentation software.
-to verify the graphic display sketches of the plant, issued by the other two engineers, necessary for the F&G/ESD/DSC vendor.
-to verify the C&E diagrams accomplished by the other two engineers, before to be issued, necessary for the F&G/ESD/DSC vendor.
My objective is to work with a well nown company with big prestige to be satisfied technicaly and financialy.
|
| Skills: |
Software Trained
• Microsoft Office (Word, Excel), Windows platform.
• Intools 6.0
• Smart Plant Instrumentation
• Design GX(for Fisher control valve sizing)
• ORICAL (for orifice plates, venturi tubes calculation)
• Auto Cad; Microstation/j
• Navis Work
• Smart Plant Viewer
• Encompass
Dcs Software
• Delta V 7.1
Software for maintenance and investents activities
• “Maximo”
Competences
• Process control and safety instrument systems (DCS/ESD), anti-surge and compressor control, vibration conditioning monitoring systems, field instrumentation and actuated valves, motor control equipment, packaged equipment interfaces, implementation of explosion proof techniques.
• Advanced control structures and algorithms, including feed-forward control (MVPC)
• Knowledge about DELTA V, Yokogawa DCS, Allen-Bradley Slc500, Modicon Plc’s.
• In-depth knowledge of various international standards like: ISA-S5.1…5.5; S75.01; S75.03; S75.07; S75.16; ISO-5208; IEC-60079; 61131-3; 61158-2; 61508/61511; 60529; 61000; 60085; API-5L; 60-6A; RP-550.S1; RP-550.S5; RP-550.S6; 6FA; ASME-B1.20.1; B36.10; B16.34; B16.47; B16.5; ASTM-A106; A333; A335; A213; A312; A358; NFPA-72; ATEX-94/9/EC; NEMA; Saudi Aramco Standards like SAES-J; SAMSS; NACE-MR0175/ISO 15156/1/2 for corrosion.
• CCTV.
• F&G system: Gases detectors, Flame detectors, Heat detectors, Manual Control Devices, Smoke Detectors, H2S Detectors.
• HVAC, instrumentation.
DCS engineering
The activities involved in:
• Implementing of “DELTA V” Distribution Control System:
=DELTA V 7.1 Software=
Defining Plant Areas in “DELTA V Explorer”.
Configuration of “Device Signal Tags” in “DELTA V Explorer” and downloading into the controllers.
Create the “Function Block Diagrams” in “Control Studio”.
Creation of Control display (screens) in accordance with P&ID, using “DELTA V Operate configuration”.
Add Data Links to the display screens.
|
| Known languages (and levels): |
English-Very GoodFrench-GoodGerman-A little
|
| Type of Employment wanted: |
Contract
|
| Minimum Yearly Salary in Numbers: |
50000 Euro
|
| Current Location: |
Romania, Ploiesti |
| Education History, Qualifications & other additional information: |
| Level of Education: |
Bachelor
|
Education
Bs Degree, Polytechnic Institute of Bucharest, Faculty of Electric 1980
|
| Work History & Experience: |
| Years of Work Experience: |
More than 15 Years |
Professional Experience Record:
Client: Jv Skema-tozzi Company-Ravenna-Italy (March 2009-up to present)
Job Type: Senior I & C Systems Design and Consulting Engineer.
Project Name: Experimental project: An offshore platform build on an artificial Island in Kashagan..
Technical Profiles:
My work include at this moment the verifying and modifying in case of the instrumentation project for HVAC systems from, MCC, ITR, LV Room, HV Room, Transformers Room, Battery Room, LER, HVAC Room of complex “D”.
Client: Sc-consus Srl Company-Ploiesti-Romania (August 2008-up to March 2009)
Job Type: Senior I & C Systems Design and Consulting Engineer.
Project Name: Auto tanker loading facilities.
The projects consist of the automation of the petroleum refining products loading stations at ROMOIL-Romania.
The field instruments used for these projects are the following: Coriolis Mass flow type CMF300, flow transmitters type
Micro Motion 2700, local flow controller type Petrocount SMS, loading valves type Daniel V788(mounted on the up
Loading arms), products selection valves type V710, Earth/Overfill protection type EUS-1(available for bottom loading)
And earth protection type EKS-1(available for up loading).
The field automation is monitoried by a PLC mounted in the Central Control Loading Station.
Client: Eni-tecnomare Company-Milano-Italy (January 2008-June 2008)
Job Type: Checker Instruments & control systems design engineer.
Project Name: Experimental project: An offshore platform build on an artificial Island in Kashagan.
The Offshore platform contain Charge Barges, Compressors, Gas treatment platforms, WABAS Building, Garage and
Warehouse Store.
Technical Profiles:
My work has included verifying and modifying in case of: P&ID`s , Field Instrument Data Sheets, Hook-up Drawings, MTO, I/O list data base, C&E Diagrams, Panel Termination Diagrams and Instrument UPS, Distribution Block Diagrams for Logistic Support Area, Iocated in the offshore plant.
Client: Initec-technical Reunidas-Madrid Spain-(April.2006-January.2008)
Job Type: Instruments and control system design unit engineer.
Project Name: Hawiyah, Gas Plant Expansion-Gas Treating GT6 - Saudi Arabian:
Technical Profile:
The project: Gas treatment and Thermal Oxidizer plants for Hawiyah-Saudi Arabia.
I was involved in the development of:
Conceptual (FEED) engineering
Duties: Finalize the P&ID’s, develop general specification and prepare material requisitions for control valves and all other instruments (pressure, flow, level, temperature transmitters, fire&gas detectors); input to Piping and Instrument diagrams (P&ID`s); preparation of the preliminary I/O List account modules for ESD/DCS, and F&G systems, preparation of boolean logic diagrams, ICSS diagrams elaboration, control narratives description, cause & effect diagrams and instrument index; vendor drawings checking in interdisciplinary check. Prepare technical bid evaluation and recommend the final technically acceptable vendor.
Detailed engineering (EPC)
Duties: Foundation Field bus segments calculation, Block wiring and segment diagrams sketches elaboration,
Guidance & supervision of the design team for: Block and wiring diagrams drawings designing, Instrument Installation schedule, Miscellaneous Instrument Details, Typical Hook-Up Drawings and Material Take Of(MTO) base on the piping classes, Cable routing layout, Support materials, Fittings, Conduits, Cable trays, Pneumatic tubes elaborating.
I have participated in HAZOP meetings and key document reviews; technical interface with other disciplines; liaise and work proactively with all involved parties in the execution. I provided mentoring and transferred knowledge, skills and experience to entry level engineers and designers.
Instruments and control system devices implemented on the platforms
- Yokogawa DCS type Centum Xl
- Emergency shut down (ESD) is monitoried by a TMR(Triple Modular Redundancy), type ABB Triconex System.
- Vibration system monitoring (VMS) for compressors and rotating equipments is a Bentley Nevada 3500 with 3300L detectors.
- 1900/65 Local Units vibration for fin-fans.
- Fire and fighting systems using: explosion gases detectors type “Crowcon”.
- Smoke detectors “Bentel”
- Smart differential pressure and gauge pressure Transmitters model Ejx 110a; 430a produced by , “Yokogawa¨.
- Foundations Field bus Communication Type Vortex Flow meter model DYA produced by ¨Yokogawa¨.
- Level transmitters displacer chamber type ¨Foxboro 104dc”.
- Fisher-rosemound Thermocouples and thermoresistances.
- Smart Temperature Transmitters type YTA110 produced by “Yokogawa”.
- Regulation valves with intelligent “PID” positioners, type Fieldvue Dvc 5000f.
- Motor operated valves produced by „Biffi”.
- Pneumatic Emergency Shut Down valves (ESV), produced by Bifi.
Client: “i.L.F. Beratende Ingenieure Gmbh, Werner-Eckert-StraBe 7, 81829 Munchen local office Ploiesti Romania
(May 2005-March 2006)
Job Type: Team leader design engineer.
Projects Name:
The cost evaluation of the existing “Offshore gas gathering system OGGS receiving facility, Bonny, Island – Nigeria.
OMV Tank Farms Revamping-Romania.
Technical Profile:
In this projects I was leader engineer and I have achieved the following activities:
Man hours estimation, site visit data collection, management and overall coordination of instrumentation engineering design project, including technical guidance providing to other staff, monitor project progress and conformance with established plans, produce reports and procedures.
Client: “rominserv Sa”, Vega Refinery, Ploiesti – (August 2003 – May 2005).
Job Type: Project Manager and Coordinator instruments engineer.
Projects Name:
Pc Network extension, cod Ris-vega-it at Vega Refinery-Ploiesti Romania.
Tank Farms and Loading ramps into auto tanks revamping-Vega Refinery; using ¨SAAB¨ radar level transmitters, “Elite” mass flow sensors, “Micro Motion” transmitters, model 2700, Petrocount SMS computers, centralized by PC.
“Aromatics Extraction from gasoline” plant at Vega refinery, Ploiesti, Romania.
Technical Profile:
I have worked like project manager for the first and second project and I have performed the following activities:
The achievement of the “Project Proposal”, the achievement of the “Project Status”, ensuring of the information flux accomplishment, ensuring of all team members charges achievement, ensuring of quality requirements for the project.
Ensuring of the communication between designer, contractor and client, including the ¨Author Audit¨ of the designer at the dead line of works, identify all problems which can affect the dead line, quality and project cost, collection of daily reports and quality signed statements from supervisors, notification for the ¨Project Implementation Administration¨ of all problems which can affect the dead line, the quality and the cost of the project, the achievement of ¨TBA¨(Technical bid evaluation) for construction services, ensuring of the ¨Cash-Flow¨, the ¨Bill Invoices¨ to arrive for Financial Department.
I was involved in the third project like Instrument & Control System supervisor engineer, performing the following activities:
Site visit data collection, produce Reports, develop Bid Packages ( SCADA and Automation, a.S.O.), take part in clarification meetings held with the bidders;
Checking detail design issued by Contractors (PFD’s, P&ID, piping, data sheets, Typical hook-up drawings, Cable tray routing, Loop drawings and hardware construction, I/O lists, C&E, Trouble shooting diagrams, Cabinets metering, a.S.O.).
Site visit inspections and issuing site visit inspection reports.
Client: Qatar Petroleum.- (October, 2002 to December 2002).
Job Type: Supervisor instruments engineer.
Project Name: “ngl-4” Gases Station and refinery in Dukhan, Qatar.- (October, 2002 to December 2002).
Technical Profile:
My work has included:
The solution of punch lists issued by client “Qatar Petroleum”, regarding the new plant “NGL-4”.
Checkout and Calibration of I/P converter, Flow transmitter, Level Transmitter, Pressure transmitter, Temperature transmitter, Control Valves, Pressure Switch, TC and RTD etc.
Loops checking before running tests, direction and control of daily commissioning discipline automation activities.
Client: “ple Engineering” GmbH, Dept XM, Kallenbergstrasse 5, D-45141 Essen, Ploiesti office, Romania - (April,, 2002 to October, 2002)
Job Type: Instrument & Control System Consulting Engineer
Project Name: ”romanian National Crude Oil Transport System Rehabilitation Project”,
Financed by World Bank. Project consist of rehabilitation works for over 4500 Km pipeline ranging from 2 to 28 inches, 30 pumping stations, loading/un-loading ramps, terminals and storage capacities.
Technical Profile:
My work has included verifying: P&ID`s , Field Instrument Data Sheets, Hook-up Drawings, MTO, I/O list data base, C&E Diagrams, Panel Termination Diagrams and Instrument UPS, Distribution Block Diagrams, site visit data collection, produce Reports.
Client: Petrotel-lukoil Ploiesti (Refinery and Petrochemical Works - (2000 – 2002)
Job Type: Head of automation design department..
Projects Name:
Isomerization plant C5-C6 fraction installation centralised by Yokogawa Distributed Control System.
Vacuum Absorption Distillation plant, centralized by “DELTA V Distribution Control System.
Hydrogen compressors, automation of interlocking and ESD system, centralized by “Modicon” Plc.
Technical Profile:
Management and overall coordination of instrumentation engineering designing projects including providing technical guidance to other staff, monitor projects progress and conformance with established plans. Review the developed plans, specification. Conducts technical and commercial evaluation of bid for equipment/material selection and make final recommendations. Participates in clarification meetings with vendors (Fisher Rosemount, ABB, VEGA, SAAB, YOKOGAWA, CEAG, etc) to ensure compliance with technical specifications and requirements. Follow-up site.
Client: Ipip Ploiesti (Design Institute for Refineries and Petrochemistry) - (1983 – 1991)
Job Type: Instrument design Engineer.
Projects Name:
Electric Desalted plant, into ASTRA Refinery, Ploiesti, Romania
Vacuum Absorption Distillation plant-Furnaces automation into Brazi Refinery, Ploiesti, Romania..
F&G system: Gases detectors, H2S Detectors in almost all refineries from Romania.
Technical Profile:
My work consist of the basic and detail design’s elaboration for these projects.
Conceptual (FEED) engineering
Duties: Create the P&ID’s, develop general specification and prepare material requisitions for control valves and all other instruments (pressure, flow, level, temperature transmitters, fire&gas detectors); input to Piping and Instrument diagrams (P&ID`s); instrument index; vendor drawings checking in interdisciplinary check. Prepare technical bid evaluation and recommend the final technically acceptable vendor.
Detailed engineering (EPC)
Duties:Block and wiring diagrams drawings designing, Instrument Installation schedule, Miscellaneous Instrument Details, Typical Hook-Up Drawings and Material Take Of(MTO) base on the piping classes, Cable routing layout, Support materials, Fittings, Conduits, Cable trays, Pneumatic tubes elaborating.
I have participated in HAZOP meetings with the clients and key document reviews; technical interface with other disciplines; liaise and work proactively with all involved parties in the execution.
|
|
|
|
