|
|
| Position wanted: |
Production Engineer |
| Job category: |
EngineeringGas IndustryOil IndustryProduction |
| Objective and Resume Summary: |
|
Executive Summary
A highli experienced and motivated specialist in the operation of Petrochemical plants(iso propel benzene plant and phenol plant) and gas plant,with extensive experience on plants in Romania and Libya who has developed:
- organizational and co-ordination skills ;
- management expertise ;
- ability to communicate at all levels ;
As Production Superintendent and Production Supervisor, I had the responsibility for meeting Department objectives related to product production, quality, personnel matters, and interpretation of company policy. This includes continuous improvement of department efficiencies, and development of individuals within the organization.
Also I had Supervisory duties and responsibilities include: a) Responsible for performance management and development of direct reports including written performance appraisals; b) Administers company policies and procedures in the Manufacturing Department; c) Ensures compliance with QSR`s and ISO, safety policies, and good housekeeping; d) Responsible for initial training of new employees and on-going training of subordinates to ensure quality of work, QSR`s and ISO, and other regulatory compliance; e) Promotes Total Quality Management, and emphasizes an environment to foster teamwork; and f) Effective staffing of organization, including hires and dismissal of employees when needed.
Another responsabilities :
•Ensure that the Permit to work sistem it’s used properly
•Responsible for safety of all employees within the organization.
•Develops departmental budgets and maintains adequate staff support for production requirements.
•Ensures production plans are accomplished.
•Manages on-going cost reduction and continuous improvement programs to the manufacturing process.
•Handles disciplinary needs, attendance and individual employee matters of direct report personnel.
•Maximizes all resources with respect to space, parts, machinery, and people.
•Ensures products conform to quality standards by taking the following actions:
•Initiates corrective action to prevent product non conformance.
•Identifies and records product quality problems.
•Initiates and recommends solutions.
•Verifies solutions.
•Controls further processing, delivery or installation of nonconforming product until correction of the deficiency.
•Participates in task forces, committees. teams, as necessary.
I have experience in Oil & Gas Industry in Production and maintenance of high pressure process (CO2 and H2Sremoval using MDEA)and utility equipment including wellheads(oil and gas wells ), turbines(Gas turbines), gas compressors(Reciprocating Compresors,Centrifugal Compredors), process vessels, diesel engines, control systems(ABB Frelancer and Tenore DCS Sistem ), HVAC etc.
Career Objective
• To get new technical knowledge and to combine with my abilities .
• To work in my branch at adequate level .
|
| Skills: |
|
| Known languages (and levels): |
English-GoodFrench-A littleArabic-A littleRussian-Very GoodOther: Romanian
|
| Type of Employment wanted: |
ContractFull Time
|
| Minimum Yearly Salary in Numbers: |
50000 Euro
|
| Current Location: |
Romania, Onesti |
| Education History, Qualifications & other additional information: |
| Level of Education: |
Bachelor
|
work.
Education
• “Communication and Development of Managerial Ability”-Romanian Institute of Management-Bucharest, June 1997
• University of Iassy ,Faculty of Industrial Chemistry -1995 ,M. Sc.
• High School Baccalaureate –„Cuza Voda „ High School ‚ Husi –Romania -1987.
|
| Work History & Experience: |
| Years of Work Experience: |
10 to 15 Years |
Work Experience
Period : May 2008-Present
Position: Gtu Shift Supervisor
Company: EPSCO Technical Services AG-Switzerland contracted to eny gas – libya, mellitah gas plant- LIBYA.
Plant/Job description:
Monitoring and control of onshore Gas Plant consists in Gas Treatment Unit (three process trains) and Sulphur Recovery Unit (three sulphur trains).
Involved in Gas Treatment unit: Gas Sweetening with amine( MDEA), Gas Dehydration (molecular sieves), Gas Hydrocarbons Dew Point control (Toromont refrigeration package), Condensate Stabilization Unit (Dresser Rand compressor for off-gas recovery), NGL Fractionation Unit.
DCS: ABB Tenore
Duties: Monitors the operational activities via the DCS, and co-ordinates the process activities according to instructions and production requirements;
Maintains continuous radio contacts with duty personnel, informing them of current operating conditions, laboratory results and co-ordinates the action necessary to maintain within the agreed operating parameters;
Adjusts operating conditions or product flows to allow isolation of equipment for maintenance and resumes operating conditions following completion of maintenance;
Co-ordinates with maintenance for equipment change-over and instrument loop checks. Endorses related Permits to Work and raises Maintenance Work Orders as required;
To carry out start-up preparation, normal operations, shutdown of process/utilities lines as per Standard Operation Procedures;
Determines developing trends in operating conditions, reporting significant changes and initiating actions as required;
I was involved in all the plant activities, in all the areas, supervising and coordinating the activities of the DCS operators and the field operators, during normal operations, start-ups and normal or emergency shutdowns of the plant, also during turnarounds and maintenance activities.
Period : December 2007-April 2008
Position: Senior Field Operator
Company: EPSCO Technical Services AG-Switzerland contracted to eny gas – libya, mellitah gas plant- LIBYA.
Plant/Job description:
Monitoring and control of onshore Gas Plant consists in Gas Treatment Unit (three process trains) and Sulphur Recovery Unit (three sulphur trains).
Involved in Gas Treatment unit: Gas Sweetening with amine( MDEA), Gas Dehydration (molecular sieves), Gas Hydrocarbons Dew Point control (Toromont refrigeration package), Condensate Stabilization Unit (Dresser Rand compressor for off-gas recovery), NGL Fractionation Unit.
Duties: Monitors the operational activities, and co-ordinates the process activities according to instructions and production requirements;
Adjusts operating conditions or product flows to allow isolation of equipment for maintenance and resumes operating conditions following completion of maintenance;
Co-ordinates with maintenance for equipment change-over and instrument loop checks. Endorses related Permits to Work and raises Maintenance Work Orders as required;
To carry out start-up preparation, normal operations, shutdown of process/utilities lines as per Standard Operation Procedures;
Determines developing trends in operating conditions, reporting significant changes and initiating actions as required;
I’m focal communications point between Shift Supervisor/Superintendent and Field operators during emergency situations.
• Period : December 2005-July 2007
Position: DCS panel operator
Company & Location: Petroconsult SRL for Attahaddy gas plant development
Project –Sirte Oil Company- Libya .
Plant description &
Responsibilities :
The Attahaddy gas plant has been designed for treating raw sour natural gas from the Attahaddy gas field by reducing CO2 content and ensuring the compliance with the water and hydrocarbon dew point temperature specifications.The feed gas contains about 12% CO2 and a sizable amount of condensate. The feed gas is collected from the production wells by individual flow lines and is received into the plant in three manifolds. The gas is separated and treated in two identical and independent processing trains, each designed with a front end separation unit; an Acid Gas Removing unit, a Propane Refrigeration unit and a Condensate Processing unit. Both trains are sharing the common facilities as the inlet manifolds, the test separator, the Heating Medium system, the amine storage system, the Mercury Removal system and the flare system.
The front end separation unit remove water, sand and, by cooling the gas, the main amount of condensate. In the Acid Gas Removing unit the CO2 content is decreased to below 2 % by absorption in MDEA solution in an absorption tower, followed by the MDEA solution regeneration. The Propane Refrigeration unit reduces the gas temperature in chillers to ensure the proper water content and the hydrocarbon dew point temperature. This system also uses an MEG injection and regeneration unit for removing the water from the gas. The liquid propane is evaporated in the chillers and is liquefied after been compressed in the propane compressors. The condensate processing unit collect all the condensate from the train, and flashes the condensate to the proper bubble point necessary for transport.
The treated gas from both trains is routed to the Mercury Removal unit where traces amount of mercury are removed and then the gas is routed to the pipeline.
The Utilities and Off-Site Section consist in a Nuovo Pignone Gas Turbine and Generator for the power generation, Demineralised Water system, Raw Water storage and Potabilization system, Fire Fighting system, Instrument and Service Air system using air compressors and the associated dehydration unit, Nitrogen generation package, Fuel Gas system, Flare system .
I was involved in all the plant activities, in all the areas, controlling the plant using the DCS system, during the plant normal operations, start-ups, normal and emergency shutdowns also during the maintenance activities.
As a DCS operatorI had the following duties and responsabilities:
To comply with all company Health, Safety and Environment policies and procedures.
Monitors the operational activities of my assigned area, via the DCS, and co-ordinates the process activities according to instructions and production requirements.
Maintains continuous radio contact with duty personnel, informing them of current operating conditions, laboratory results and co-ordinates the action necessary to maintain within the agreed operating parameters.
Maintains continuous liaison with the Panel Operators of other areas to co-ordinate operations that may affect the operation and/or production or any unit within the plant. Includes synchronising activities to minimise loss of production.
Adjusts operating conditions or product flows to allow isolation of equipment for maintenance and resumes operating conditions following completion of maintenance.
Keeps myself aware of ongoing maintenance work by reviewing permit to work records and operating logs.
Co-ordinates with Maintenance for equipment change-over and instrument loop checks. Endorses related Permits to Work and raises Maintenance Work Orders as required.
Determines developing trends in operating conditions, reporting significant changes and initiating action as required.
I was focal communications point between Shift Supervisor/Superintendent and Field Operators during emergency situations.
Responsible for the support of Company Safety, Environment and Quality Policies and Programmes. Carries out specific duties and responsibilities related to his job as dictated in the Management System Manual, Safety Manual and other related documents.
Carries out similar or related duties such as maintaining shift log, initiating emergency procedures as required while complying with Company safety rules and regulations.
• Period : 2001-2005
Position : Superintendent
Company & Location: Carom S.A. Onesti -Romania
Responsabilities :
Dealing with the coordination of the following processes: IPB (isopropyl benzene) obtaining by alkylation of benzene with propylene, phenol and acetophenone synthesis. Controling the mercaptan absorption process from C3 fraction, using DEA (diethanol amine) and the dehydration unit using molecular sieves as well. Ensuring the observanceof technical documentation, monitoring the production achievement and products quality, supervising supervisors’ activities. Elaborating (alongside with supervisors) the operating manuals of the plants after revamping works, attending to process improvement. Taking the corrective adjustments of the process for a better quantity and quality of the finel products: phenol, acetone, acetophenone, IPB. Monitoring the evolution of the pollutants analyzing each of them, adjusting process parameters for lowering the environment impact.
• Period : 1998-2001
Position : Phenol plant –Supervisor
Company &Location : Carom S.A. Onesti-Romania
Responsabilities :
Starting up the plant after revisions works or overhauls, keeping the production at the designed specifications; preparing the plant for revisions or maintenance operations, shutting down it in safe conditions if necessary. Coordonating proces activities, verifying products and raw material quality, lowering the raw material consumption and energy as well. Training the subordinated personnel regarding the plant equiment and process stream, drawing up the overhauls and revisions schedules. Elaboratin the work procedures in compliance with safety regulations and fire fighting rules.
• Period : 1995- 1998
Position : Phenol plant –Team leader
Company & Location : Carom S.A. Onesti-Romania
Responsabilities :
Ensuring the technical assistance during the shift regarding the following processes: cumene oxidation to cumene hydro peroxide and its decomposition to phenol and acetone followed by purifyng process of these components; phenol and styrene alkylation; acetophenone obtaining process. Training subordinated personnel regarding the process, enforcing compliance with HSE regulations, controlling the entire process in safe conditions, veryfing productsquality and adjusting the process parameters according to this, attending to revisions work.
|
|
|
|
