Controls Project Engineer
-
Engineering
Systems Engineer, Automation & Mechatronics Engineer, Electrical Engineering, Field/Service Technician
Job Description & How to Apply Below
We're building data center sites and need someone who owns controls commissioning in the field. You'll be on site most of the time, getting chiller plants, CDUs,FWUs power and BMS systems running, and making sure what was designed is what actually works.
You'll fix what you can on the spot, escape what you can't, and stay with the site after go-live as the controls go-to person. We move fast, so you need to be comfortable making calls in the field.
Where you’ll workThis role is ideally based in our San Francisco, Long Beach, or Houston offices, with full-time onsite expectations outside of bi-weekly WFH Fridays.
That said,
we will make exceptions for truly exceptional talent if you live outside one of our hubs. If you're the right person for this role, we'll have a conversation about what works.
Commissioning lead. Own controls commissioning at each site, L2 through L5 and IST. Be the main contact for the third-party CxA.
Controls startup. Check out PLCs, HMIs, SCADA and BMS. Run loop checks and verify alarms and interlocks.
Site SME. Be the site's go-to person for controls: PLC, SCADA, BMS, EPMS and instrumentation.
Troubleshooting. Lead troubleshooting of critical systems in the field. Make small PLC and HMI edits on site, and escape bigger changes to design team.
Contractors. Coordinate electrical, mechanical and controls contractors on site.
Field networking. Bring up and check device comms for VFDs and field devices over Modbus TCP/RTU, RS485 and Ether Net/IP, working with the Network Engineer.
Controls device upkeep. Handle firmware updates and patching on controllers and HMI/SCADA hosts, including Linux machines.
As-builts. Redline drawings in the field and update as-builts in CAD.
Cx documentation. Own checklists, test scripts, punch lists and turnover packages.
After go-live. Be the escalation point for controls events and alarms, join the on-call rotation, and lead root cause analysis after events.
Standards. Turn lessons learned into commissioning standards so the next site goes smoother.
5+ years in controls or automation in industrial or commercial settings.
Proficient in the Rockwell PLC/HMI environment (Studio 5000, Factory Talk), comfortable making edits in the field.
Fluency in understanding site level drawings, PID diagrams, Control and power schematics, Equipment cutsheets and network drawings.
Familiarity with Ignition vision and perspective.
Experience with SCADA, BMS or EPMS: monitoring, alarm configuration, troubleshooting and HMI operation.
Familiar with mechanical and electrical systems: cooling (chillers, CRAHs, AHUs), power distribution (switch gear, UPS, generators, VFDs, ATSs), pumps, sensors and field I/O.
Familiar with OT network setup and protocols like Modbus TCP, Modbus RTU, RS485 and Ether Net/IP.
Can diagnose hardware and software faults and make changes in the field to get the systems up and running immediately.
CAD skills for redlines and as-builts.
4-year engineering degree, Electrical or Mechanical preferred. Any degree is OK.
Willing to travel around 80%.
Data center or mission critical commissioning experience.
Experience with firmware, patching and access control on OT devices.
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).