Operations Tech, Finishing

** A BRIEF OVERVIEW
** The Operations Technician I performs various operations that support the production of parts.

** WHAT YOU WILL DO
*** Belting/Polishing - uses conventional polishing and belting lathes for the specific belting and/or polishing operations based on the information on engineering drawings, ex. Fiber-wheel finish and/or Satin finish. (Product knowledge required).
* Buffing – uses conventional buffing/polishing lathes along with appropriate buffing materials (wheels, compound and machine speed) to acquire specified finishes called-out on engineering drawings.
* Die grinding - uses air and/or electric hand held tools for specific grinding, flapping or detailing an area on a part that is usually confined or the inside diameter of a cylindrical part.
* Blasting – determines proper media to be used based on the information taken from the engineering drawings and/or the work instructions and the proper machine and machine settings.
* Tumbling - uses centrifugal and vibratory equipment to perform mass finishing operations and must have the knowledge to select the appropriate media, compound and water flow to achieve the necessary finish required.
* Properly fills out and completes paperwork and labor reporting transactions.
* Maintains cleanliness of the work area and leaves the work area in clean condition for others when finished.
* Detect and report faulty equipment, defective material and any unusual conditions to the department Supervisor or Lead.
* Use hand truck, pallet jack, carts and tables to safely transport product.
* Dimensionally inspect work, using appropriate tools including, but not limited to; calipers, comparators, pin gauges, measuring instruments and surface plates, etc. as required.
* Maintain work area, tools and equipment in a clean and organized condition.
* Complete all required training.
* Support Lean Manufacturing and EHS initiatives.
* Support quality and compliance by adhering to all procedures, work instructions, and forms per the Quality Management Systems (QMS)
* Follow work orders to perform operations on various parts and products
* Follow designated safety rules and regulations.
* Reinforces safety expectations. Ensures safety operating practices are demonstrated. Reports issues/concerns to Supervisor.
* Perform weekly housekeeping per 5S schedule.
** KNOWLEDGE & SKILLS THAT ENABLE SUCCESS
*** Standard Operating Procedures - Working Experience
* Mathematical Ability - Basic Knowledge
* Data Entry - Basic Knowledge
* Accuracy and Attention to Detail - Working Experience
* Time management - Working Experience
* Problem Solving - Working Experience
* Hand Dexterity - Extensive Experience
* Active Learning - Working Experience
* Quality Inspection Metrology Tools - Working Experience
* Information Capture - Working Experience
* Blueprint Reading - Basic Knowledge
* Quality Management - Basic Knowledge
* Manufacturing Safety - Working Experience
* Communication - Basic Knowledge
** PHYSICAL DEMANDS
*** Must be able to remain in a stationary position - Frequently
* Must be able to move about the inside of the building - Occasionally
* Must be able to move equipment around the building - Occasionally
* Must be able to position oneself and move under/around/over equipment - Occasionally
* Must be able to handle/adjust/inspect/position various items and equipment - Constantly
* Must be able to communicate and exchange information with others - Frequently
* Must be able to perform tasks that require repetitive handling/adjusting/inspecting/positioning of items and equipment - Constantly
* Must be able to distinguish and detect information such as writing and defects - Frequently
** WORKING CONDITIONS
*** Noise - Occasionally
** WHAT WE OFFER
*** Opportunity to work in a growing company
*…