Robotics Technician II/III – Test & Troubleshooting
-
Trades / Skilled Labor
Job Description & How to Apply Below
Tutor Intelligence builds autonomous robots in our factory in Watertown, MA. Our robots move boxes and pallets for businesses ranging from family-owned manufacturers to some of the largest brands in the world. We're scaling fast, and every robot that leaves our floor goes to work in a real warehouse.
On-site in Watertown, MA
· Full-time
· 1st shift (8:30 AM–5 PM)
· Hourly, non-exempt · $34–$50/hr + overtime
Must be authorized to work in the US. We can't sponsor visas for this role.
The Role
You take a robot fresh off the assembly line, power it up, bring every system online, and own it until it's tested, documented and ready to ship. When it doesn't work, you find out why with a meter and a schematic. Then you fix it and prove the fix holds.
The robot is an autonomous palletizer: a collaborative robot arm on a battery-powered mobile base, with vacuum tooling, sensors and safety circuits. You're the last set of hands before the customer.
This is a hands‑on technician job on the production floor, not a desk or engineering role. If your experience is mainly software, simulation or academic projects, this isn't the right fit.
What You'll Do
Inspect wiring workmanship and perform a safe first power‑up on robots coming off the line
Check out each system: batteries and DC power, wiring, arm, drive motors, sensors, vacuum tooling and safety circuits
Load software, firmware and calibrations using our tools and procedures
Run functional and final acceptance tests, including multi‑hour continuous runs
Troubleshoot electrical, mechanical and setup failures down to the root cause, without swapping parts until the fault goes away
Repair cables, connectors, crimps and components within approved procedures, then retest to prove the fix
Log failures, repairs and results against each robot’s serial number
Bring recurring problems to Production Engineering and Quality so they get fixed at the source
Prep robots for shipment
Tech III: lead the hardest debug cases, train techs and write troubleshooting guides
Two Levels, One Team
Technician II ($34–$42/hr): 2+ years troubleshooting and repairing electromechanical equipment in automation, field service, military, AGV, packaging, CNC or similar. Brings up, tests and releases robots on their own.
Technician III, Senior ($42–$50/hr): 5+ years troubleshooting and repairing electromechanical equipment, including hands‑on repair of robots, AMRs or cobots with an oscilloscope or CAN tools. Takes the hardest faults, does harness‑ and component‑level repair, trains other techs and writes troubleshooting guides.
We set your level from what you show us in the interview, not from your years alone.
What You Bring
Hands‑on experience diagnosing and repairing electromechanical equipment (2+ years for Tech II, 5+ for Tech III)
Experience bringing up or commissioning complete machines, not only assembling them or running checklists
Reading electrical schematics, wiring diagrams and assembly drawings
Confident multimeter use on power, wiring and signal faults
A sharp eye for crimps, connector pins and cable routing
A methodical approach: form a hypothesis, test it, confirm the cause, verify the fix
Clear written notes
A degree is not required
Physical requirements:
stand, kneel and reach for a full shift; lift up to 50 lb; work safely around lithium batteries and moving robots
Nice to Have
Military electronics, avionics or field service background
Experience with cobots, AMRs/AGVs or battery‑powered equipment
Oscilloscope or CAN bus tools
IPC/WHMA-A-620 certification
Basic Linux command line
Where This Can Go
We're scaling toward thousands of robots, and we promote from the floor. Technicians here can grow into:
Test Lead: running test and release for a product line
Production Supervisor: leading a…
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).
View / Apply for Jobs
Matching My Jurisdiction