Machine Tool Operator Job Bremerton area,Washington USA,Manufacturing / Production

Position: MACHINE TOOL OPERATOR.

You will perform machining operations or equipment disassembly, repair, and assembly.
You will disassemble and examine by measurement and visual inspection components such as valves, pumps, forced draft blowers, laundry/galley equipment, air compressors, and other ships' machinery and make oral/written reports of conditions found.
You will repair, assemble, and test components in accordance with specifications.
You will perform common machine tool operations on conventional machine tools such as engine lathes, turret lathes, milling machines, drill presses and shapers, machining castings, forging, bar stock or fabrication of various metals or metal alloys.
You will perform common set‑ups, select required tooling, and operate machines, establishing and controlling feeds and speeds and bring various tools to bear in successive operations.
You will use tools such as grinders, drills, reamers, taps, dies, wrenches, chisels, files, scrapers, punches, hammers and measuring instruments such as scales, micrometers, gauges, and calipers.
You will read and understand blueprints to the extent necessary to determine the dimensional and surface finish requirements of a finished work-piece, or to determine the sequence of operations in component disassembly and assembly.
You will maintain a clean and orderly worksite, following safety regulations and safe work practices.
You will ensure proper and safe operation of machine tools and equipment.

Duties

You will perform machining operations or equipment disassembly, repair, and assembly.
You will disassemble and examine by measurement and visual inspection components such as valves, pumps, forced draft blowers, laundry/galley equipment, air compressors, and other ships' machinery and make oral/written reports of conditions found.
You will repair, assemble, and test components in accordance with specifications.
You will perform common machine tool operations on conventional machine tools such as engine lathes, turret lathes, milling machines, drill presses and shapers, machining castings, forging, bar stock or fabrication of various metals or metal alloys.
You will perform common set‑ups, select required tooling, and operate machines, establishing and controlling feeds and speeds and bring various tools to bear in successive operations.
You will use tools such as grinders, drills, reamers, taps, dies, wrenches, chisels, files, scrapers, punches, hammers and measuring instruments such as scales, micrometers, gauges, and calipers.
You will read and understand blueprints to the extent necessary to determine the dimensional and surface finish requirements of a finished work-piece, or to determine the sequence of operations in component disassembly and assembly.
You will maintain a clean and orderly worksite, following safety regulations and safe work practices.
You will ensure proper and safe operation of machine tools and equipment.

Requirements Conditions of employment

Must be a US Citizen.
Must be determined suitable for federal employment.
Must participate in the direct deposit pay program.
New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
Males born after 12-31-59 must be registered for Selective Service.
This is a bargaining unit position.
You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
You will be required to work in small and/or confined spaces.
You will be required to lift or carry loads up to 60 pounds in weight.
You will need to be able to climb ladders and scaffolding.
You will be required to obtain and maintain an interim and/or final…