Skip to content
×

Operator, Furnace

Job in Dammam, Eastern Province, Saudi Arabia
Listing for: Al Ittefaq Steel Products Co.
Full Time position Listed on 2026-11-11
Job specializations:
Salary/Wage Range or Industry Benchmark: 60000 - 120000 SAR Yearly SAR 60000.00 120000.00 YEAR

Job Description & How to Apply Below

Requisition
10302
-Posted
08/11/2026

- DAMMAM

- Experience 1
- 10 Years

- Primary School

  • Heat sequence execution and charging control
  • Receive and review the daily
    heat‑wise charging sequence plan
    for the designated furnace including heat numbers, steel grades, billet sizes and quantity per heat.
  • Operate the
    charging table and charging roller table
    to bring billets from the billet grid to the pusher loading position, following strict heat sequence and avoiding mixing of heats.
  • Operate the
    cold billet pusher
    to charge billets into the furnace at the defined inter‑billet pitch and maintaining the required inter‑billet gap to ensure correct residence time and uniform heating.
  • Visually verify each billet for obvious bending, cracks, or identification mismatch before charging; segregate and report non‑conforming billets.
  • Charging data recording and reporting
  • Fill in the
    furnace billet charging report
    aligned with the heat sequence plan:
  • Record time of first billet and last billet of each heat arriving at the pusher position
  • Record total number of billets charged per heat
  • Record number of short/separator billets and reusable (re‑chargeable) billets
  • Ensure all deviations from the sequence (out‑of‑order charging, heat changes, billet shortages) are documented and communicated to production and billet handling.
  • Process and temperature monitoring (front‑end)
  • Monitor indicated
    furnace temperatures
    from thermocouples at the charging zone and soaking zones as displayed on local indicators or SCADA, and immediately report any abnormal readings (over/under temperature, sensor failure).
  • Coordinate with the Senior Furnace Operator regarding any required adjustments to charging rate due to furnace temperature deviations, fuel issues, or mill stoppages.
  • Communication and coordination
  • Maintain
    continuous communication
    with:
  • Furnace Discharging (Ejector) Operator for sequence alignment and heat change identification
  • Main Pulpit Operator for mill stoppages.
  • Billet Handling Office for any shortage or imbalance between heats
  • Immediately inform the Senior Furnace Operator / Shift‑in‑Charge of any abnormal mechanical, electrical, or gas supply issues affecting charging.
  • Equipment care and basic housekeeping
  • Perform basic operator‑level checks on the charging table, charging roller table, and pusher (unusual noises, vibrations, misalignment, oil leaks, chain slack, broken rollers) and report any abnormalities to mechanical maintenance.
  • Keep the charging grid and surrounding area free from loose scale, discarded packing, and obstructions that may interfere with billet movement or create slip/trip hazards.
  • Safety and emergency response
  • Strictly follow
    lock‑out/tag‑out (LOTO)and isolation procedures before any intervention requiring contact with moving parts (chains, rollers, pusher mechanisms).
  • Stop charging immediately and secure the area in any of these cases:
  • Mill line stoppage or cobble downstream
  • Uncontrolled billet movement, dropped billet, or suspected mechanical failure
  • Participate in emergency drills related to gas leaks, fires, and furnace trip scenarios as defined by EHS and Loss Prevention
Safety &

Housekeeping:
  • Support
    furnace shutdown activities
    by assisting in safe removal of residual billets from the charging grid and ensuring the charging equipment is cleared and parked in safe position.
  • Assist the
    Senior Furnace Operator and Furnace Foreman
    in data collection for root cause analysis (5‑Whys, Ishikawa) related to charging‑side stoppages, billet sequencing errors, or yield losses.
  • Participate in
    toolbox talks (TBT) and refresher trainings related to furnace operation, material identification, lock‑out/tag‑out, and safe lifting/handling near the charging area.
  • Provide on‑the‑job guidance to new operators or helpers assigned to the charging area under supervision of the Furnace Foreman
To View & Apply for jobs on this site that accept applications from your location or country, tap the button below to make a Search.
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).
View / Apply for Jobs
Matching My Jurisdiction

Search for further Jobs Here:

SEARCH JOBS: 10+ Million Listings
(Try combinations for better Results! Or enter less keywords for broader Results)
Education Level
Experience Level (years)
Posted in last:
Salary