End Welder

JOB TITLE
:
End Welder SOC CODE: 51-4023.03

DEPARTMENT
:
Tube Mill SUPERVISED BY:
Tube Mill Supervisor

• Turn on welder and operating stations for de-coiler and accumulator.
• Operate a forklift and overhead crane.
• Load de-coiler with material for accumulator to pull in.
• Make sure welders, de-coiler and accumulator are set to run.
• Check label, coil thickness, and width for material conformity.
• Enter coil labels into Kiosk then apply to a sheet and turn in at end of shift.
• Scans the coil into the tube mill machine using the Phoenix Bridge.
• Keeps track of weight needed to fill the work orders.
• Notifies operator of any mislabeled coils or shortages with slit coils.
• Before butt-welding insure both ends are joined and flattened properly. MUST grind every weld!
• Watch for tail-out of coil and alert mill operator if accumulator supply is low.
• Fill accumulator then set to mill match.
• Monitor Accumulator to ensure mill can attain maximum speed.
• Give instructions to other mill workers as needed.
• Assist on change overs for minimal downtime between production runs.
• Maintain a safe, clean, and organized work area for weekly inspections.
• Work with Maintenance and Engineering to improve equipment operation and uptime.
• Other duties as assigned.

• Ability to multitask in a fast paced physically demanding environment.
• Ability to work efficiently and safe.
• Ability to adhere to company policies and procedures.
• Ability to follow written instruction in English.
• Ability to work with minimum supervision.
• Ability to work efficiently in a group setting.
• Valid driver’s license required. Ability to operate Fork Lift, Overhead Crane, and LOTO.
• Regular predictable attendance.
• Work 2nd Shift.

• Safety
• Collaboration
• Relentlessness
• Honesty
• Proactivity
• Innovation
• Reliability
• Flexibility
• Responsiveness

These values we hold true in every aspect of our company. These are our foundations.

• Make sure to stay clear of all moving parts and machinery
• Make sure all guards are on equipment before operating (includes hand tools).
• Keep all safety barriers closed.
• Keep clear of coil and tooling being lifted with overhead cranes.
• Watch for moving forklifts at all times.
• Do not handle any metal without approved gloves.
• Do not work on die while flywheel is running.
• Keep your work area nice and clean.
• Never put your hands in or near pinch points.

Safety Requirements As a Tube Mill employee you are required to follow all safety requirements and wear all proper PPE at all times. Your safety is the most important priority. These PPE’s are required to be worn daily failure to do so will result in a write up every time you are seen not wearing them.

Lifting 50 pounds and over with assistance frequent lifting and/or carrying of objects weighing 30 to 49 pounds