Electric Welder
-
Manufacturing / Production
Job Description & How to Apply Below
Job Description
Chipton-Ross is seeking multiple Electrical Welders for a contract opportunity in Newport News, VA.
BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE):
Four years of NNS or naval shipyard experience as a first class Welder.
Required Skills:
1.Multi-pass. All position fillet and butt welds using the following processes:
1.SMAW (Shielded Metal Arc Welding.
2. Heating - Oxygen/Propane Heating Torch.
3. Experience working in a physically demanding environment (shipboard, sub-assemblies, ladders, staging, etc.). 4. Familiarity with OSHA regulations relative to the shipbuilding industry. 5. Air Carbon Arc Gouging.
6. Ability to properly use fillet and butt weld gauges.
Welding
Qualification:
All Welders will be required to pass all position, Multi-pass Butt Weld, Welder Qualification Tests prior to reporting for the first day of productive work. These tests will be in accordance with MIL-STD-248D Paragraph 5.3.3 and the following:
A. All position (Horizontal (2G), Vertical (3G), and Overhead (4G)) SMAW (Shielded Metal Arc Welding) process.
B. Air Carbon Arc Gouging proficiency test. The Welding School will administer the following tests: 1. All Welding Qualification Tests in “A” (6 hours). 2. Visual Inspection of Welds Level I (4 hours). 3. Welders Vision Test (5 minutes). 4. Air Carbon Arc Gouging Proficiency Test (1 hour). Prior to performing work at Newport News all Welders must successfully pass, without training, the above tests at the Newport News welding school.
Required Safety Training /
Qualifications:
Leased Labor Provider Company (LLPC) shall provide employees who have completed the following safety training and /or medical clearance. Leased Labor Provider Company shall provide documentation (copy of training, records, medical clearances, etc.) on Company Letterhead to Newport News Environmental, Health and Safety Department (O27) for review and approval prior to assignment of employees to work at Newport News. All Personal Protective Equipment (PPE*) is to be provided by the Leased Labor Provider Company.
All Personal Protective Equipment provided by the Leased Labor Provider Company shall meet the requirements of OSHA and the American National Standards Institute (ANSI) and /or as specified by Newport News.
1. Confined space trained in accordance with OSHA Standards 29 CFR 1915 Subpart
B. 2. Hazard communication trained in accordance with OSHA Standard 29
CFR ) (h) – (1) through (3) (iv). 3. Respirator trained and qualified. A Respirator Medical Clearance Examination as required by a Physician. The Respirator Training and Fit Testing will meet the requirements of Standard 29
CFR and each individual shall be trained in a negative-pressure type respirator, MSA COMFO CLASSIC (with MSA approved vapors and dust filter cartridges to be provided for them respirators by the LLPC). Newport News requires the use of a MSA COMFO CLASSIC Respirator only (approximate weight 12 oz.). Daily use of respirator may occur.
4. Fall Protection/4-D Body Harness-Vertical & Horizontal Lifelines-Beam Clamp trained and qualified in accordance with the following OSHA Regulations; 29
CFR, 29
CFR
1915.71 (j) (3), 29
CFR
1915.73 (d), and 29
CFR
1915.77 (c). Newport News highly recommends the vest-donning type of body harness instead of the step-into-type body harness, with D-Ring in the back. Individuals must be trained (which includes having donned the body harness and demonstrated practical use of the vertical & horizontal lifelines and beam clamp) with the same type fall protection equipment that they are expected to wear on Newport News premises or on off-site Newport News work locations.
Body Harness and Vertical & Horizontal Lifelines and Beam Clamps Systems shall comply with the…
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).
View / Apply for Jobs
Matching My Jurisdiction