Cobalt TN Detail Technician

Overview

Summary:

Repair of hulls and/or decks to Cobalt standards while following safety protocols.

• Wipe down, buff, and inspect each part to identify flaws or damage. This includes manually wiping parts with towel and acetone, buffing to remove wax and compound, and marking flaws with grease pencil.
• Sand and buff problem areas to create a smooth, shiny surface using manual sanding or power tools, followed by buffing with an air-powered buffer.
• Cut flaws out of fiberglass to remove damaged areas using a router or razor blade. Mix gel coat and catalyst and fill holes with the mixture using a tongue depressor.
• Paint over thin or damaged areas of gel coat to create a flawless surface.
• Correct crooked paint lines to create straight paint lines.
• Repair major areas in hull or deck to correct errors made during cutting.
• Repair and finesse boat areas damaged during assembly or at the end of the production line.
• Other duties may be assigned.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

High school diploma or general education (GED); or one to three months related experience and/or training; or an equivalent combination of education and experience.

Verbal instruction and comprehension are key. Ability to read and interpret documented procedures.

Basic math.

Ability to recognize and solve problems on the go.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Continuous/ C = 67-100%, Frequent/ F = 33-66%, Occasional/ O = 33%, None/ N

• Sits 1 hour
• Stands 4 hours
• Walks 4 hours
• Drives 1 hour

Maximum: 75 lbs;
Frequently: 25 lbs;
Occasionally: 50 lbs

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job, including heat/cold, dust/dampness, height, chemical exposure, and noise. PPE requirements are included. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Safety glasses and closed-toe shoes required on the production floor. Chemical-resistant gloves. Exposed to all weather conditions. Typical 10-hour workday with overtime without notice.

To perform the job successfully, an individual should demonstrate the following competencies:

• Teamwork:
  Balances team and individual responsibilities; openness to others  views; accepts feedback; contributes to a positive team spirit.
• Motivation:
  Sets personal standards of excellence.
• Quality:
  Demonstrates accuracy and thoroughness; uses feedback to improve performance; monitors own work for quality.
• Attendance/Punctuality:
  Consistently at work and on time.
• Dependability:
  Takes responsibility for own actions.

#Cobalt Boats

• Seniority level:
  Entry level
• Employment type:
  
  Full-time
• Job function:
  Engineering and Information Technology
• Industries:
  Shipbuilding

Referrals increase your chances of interviewing at Cobalt Boats. Apply BELOW