Production Specialist
Job in
Dodson, Winn Parish, Louisiana, 71422, USA
Listed on 2025-12-11
Listing for:
Jeld-Wen
Full Time
position Listed on 2025-12-11
Job specializations:
-
Manufacturing / Production
Maintenance Technician / Mechanic, Manufacturing Production
Job Description & How to Apply Below
We Make Doors - Where they lead is up to you…
Job Title:
Production Specialist (Fiber Utility)
Job Duties & Responsibilities
* Production: *
* Dump dumpsters and hoppers safely and clean up any spills.
* Assure proper relief before departing - Overtime may be required.
* Fill in during break times, vacation, or as needed during production.
* Assure that assigned areas stay clean and free of clutter at all times.
* Quality: *
- Participate in SQDCI.
* Know quality specifications and customer needs for your area.
* Housekeeping: * - Perform system clean-up tasks as required.
* Maintain housekeeping throughout entire facility, paying special attention to assigned area
* Assure that all tools, brooms, air lines are returned to their designated areas after use.
* Perform outside clean-up, mowing, and landscaping as required.
* Communications: * - Communicate with on coming and off going personnel to insure continuity between shifts.
* Communicate effectively with management regarding issues, adjustments, and changes that have taken place. Notify them of supply issues, maintenance needs, hazards, and accidents/injuries.
* Maintain complete and accurate written and/or electronic records and data.
* Maintenance: * - Be familiar with components, sub-systems, support systems, and terminology of the equipment.
* Perform/assist in maintenance and preventive maintenance tasks to minimize downtime.
* General: * - Know and understand all safety procedures.
* Will be required to learn and understand other jobs in the department for coverage of short periods of time, including breaks, lunch, and vacation.
* Quality Tech
* Fiberline Assistant
* Operate a forklift and other equipment as necessary.
* Abide by all company policies and procedures.
* Maintain required tools for use on the job.
* Be knowledgeable of production line in your area.
* Perform all other duties assigned by management. Safety Analysis Safe Work Practices:
Wear hearing protection, safety glasses, and steel toe footwear at all times. Stay aware of the job at hand and be alert for slippery floors. Keep work area clean and free of debris. Long hair must be tied back above collar. Loose clothing is not allowed on plant floor including but not limited to:
Dangling Pant Legs, Neck Ties, Long or Dangling Belts, and Hooded Sweatshirts. No jewelry is allowed including but not limited to:
Rings, Watches, and Necklaces. Use proper lifting techniques. Watch for forklift traffic. Maintain three points of contact and use caution when climbing stairs and ladders. Only use an approved low-pressure device to remove fiber and sawdust from clothing. Lockout/Tagout all sources before working on equipment. Avoid contact with hot steam pipes. Comply with all safety training including but not limited to:
Do not operate any equipment or tools that have missing guards or safety devices, Lockout/Tagout, Confined Space, Fall Protection, Ergonomics, Forklift, PPE, Emergency Preparedness, Hazard Communication, Electrical Safety and Blood-borne Pathogen Prevention. Discuss all non-routine tasks with your manager prior to start. Required Personal Protective Equipment (PPE):
Eye Protection, Hearing Protection, Gloves when handling hot skins, and Fall Protection when working at unguarded heights above six feet or when traveling and/or operating any high lift equipment. Follow special PPE requirements for pMDI resin and resinated fiber.
* Full Face Respirator: A full face respirator may be required when airborne fiber is present and there is a risk of contact with the fibers. A fit test and approval to wear one will be conducted if you are required to use one.
* Face shield and safety glasses are required:
When you are using or within 10 feet of any of the following: die buffing wire wheels, power wire brush, cut off wheel, portable grinder, and as required for safe work practices when handling pMDI resin.
* Dust Mask:
Dust mask are required when blowing down wood fibers.
* White suit required when in active resinated fiber areas (will be determined as needed). TASK HAZARDS SAFE WORK INSTRUCTION Equipment start-up. When equipment is…
To View & Apply for jobs on this site that accept applications from your location or country, tap the button below to make a Search.
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).
Search for further Jobs Here:
×