Skip to content
×

Production Operator - 3rd Shift

Job in Manhattan, Riley County, Kansas, 66506, USA
Listing for: Parker Hannifin Corporation
Full Time position Listed on 2026-11-21
Job specializations:
Salary/Wage Range or Industry Benchmark: 42000 - 65000 USD Yearly USD 42000.00 65000.00 YEAR

Job Description & How to Apply Below

Position Summary

Operate mandrel weld and splice machines, set laser O.D., and mandrel lube operation.

ESSENTIAL FUNCTIONS
  • Select proper mandrel and set up weld machine, prepare tank with correct lube, and set proper traverse setting.
  • Operate the weld machine, paying particular attention to bond of weld, alignment of weld, and smoothness of out surface.
  • Operate crimper for creating TPX mandrel splices.
  • Measure the O.D. of mandrel with a Pi tape or sliding calipers to determine if the mandrel is within specification limits of diameter and ovality.
  • Setup and use laser micrometer to monitor O.D./ovality.
  • Prepare the lube tank, agitate the lubricant properly, and apply a consistent application of lubricant to the mandrel.
  • Prepare and complete associated paperwork, i.e., time cards, weld logs, and dip logs.
  • Utilize the computer to print mandrel cards.
  • Must be able to read Pi tape.
  • Requires constant alertness to the quality of the mandrel welds, O.D., and lube.
  • Must be able to use sliding calipers.
  • Maintain production schedules.
  • Perform work per prescribed safety rules.
  • Perform other tasks as assigned by shift supervisor.
  • Ability to work overtime as required, including extended shifts & weekends, to meet business needs.
  • DEPARTMENT SPECIFIC/NON-ESSENTIAL FUNCTIONS
  • Work safely in accordance with regulations, standards, and procedures, and in a manner that eliminates unreasonable risk to health and the environment. Notify management of unsafe conditions or practices, unlawful activities and activities which present unreasonable health and/or environmental risk. Report all safety and/or environmental incidents to management immediately.
  • Prevent excess waste of product and/or components by operating the equipment in an efficient manner.
  • Maintain production schedules.
  • Participate in peer-based teams (i.e., Natural High Performance Teams), and work with groups to initiate and implement programs such as Lean Manufacturing and 5-S.
  • Other duties may be assigned at a later time
  • Qualifications MINIMUM REQUIREMENTS

    Education required:

    High School diploma or GED

    Experience:

    Production work preferred but not required

    Preferred Skills/Qualifications
  • Good verbal and interpersonal communication skills
  • Basic knowledge and use of hand tools
  • Sound decision making skills
  • Good math, reading, writing skills
  • Demonstrated mechanical aptitude
  • Strong trouble shooting skills
  • Be able to exercise continuous mental, visual, and audio attention
  • Ability to work well in a team environment
  • Skills/Competencies
  • 1. Basic computer skills
  • 2. Ability to monitor machine sounds to identify and diagnose changes in order to take appropriate action.
  • 3. Vision:
    Near acuity and accommodation for reading information to perform job tasks.
  • 4. Requires constant alertness to surroundings and product quality with attention to detail.
  • Physical Requirements
    • None at All (0%)
    • Occasional (1-33%)
    • Frequent (34-66%)
    • Continuous (67-100%)
    • Lift/Carry Up to 10 lbs
    • 11-30 lbs
    • Bending
    • Twist/Turn
    • Reach Below Knee
    • Push/Pull
    • Squat/Kneel
    • Stand/Walk
    • Sit
    • Lifting Above Shoulders

    Assessment:
    Employee must pass Pre-employment screening

    ORGANIZATIONAL RELATIONSHIPS/SCOPE
    • Report directly to Value Stream Team Leader
    • Work closely with Maintenance to resolve issues with the equipment
    WORKING CONDITIONS

    The employee may be subject to:

    • High noise levels from operating machines and equipment.
    • Physical hazards from operating machines and moving reels.
  • Work in areas where safety equipment will be required (steel toe shoes, eye protection, hearing protection)
  • Standing is required for extended periods of time. Walking, pushing, pulling, reaching, bending, turning, twisting, squatting, and lifting is performed on a regular basis
  • Requires high degree of manual dexterity, which could be performed under restrictive conditions
  • Ability to work overtime, including short-notice overtime and weekend coverage to meet business needs.
  • The employee may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws

    Parker Hannifin

    Parker Hannifin is a Fortune 250 global leader in motion and control technologies. For more than a century, we’ve enabled engineering breakthroughs that make energy cleaner, transportation safer, medical treatments more effective, and manufacturing more efficient.

    With empowered team members in more than 40 countries, Parker serves customers across aerospace & defense, energy, HVAC & refrigeration, in-plant & industrial equipment, off-highway and transportation.

    Our scale is…

    To View & Apply for jobs on this site that accept applications from your location or country, tap the button below to make a Search.
    (If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).
    View / Apply for Jobs
    Matching My Jurisdiction

    Search for further Jobs Here:

    SEARCH JOBS: 10+ Million Listings
    (Try combinations for better Results! Or enter less keywords for broader Results)
    Education Level
    Experience Level (years)
    Posted in last:
    Salary