Masker - Night Shift - Aerospace

Work Schedule:

M-F, 4 PM - 2:30 AM

If hired, you will be required to complete your training courses before coming to the shop floor.

• First day of Orientation would be from 9 am
  -4:30pm
• After first day, you will be able to come in at 6 am to continue your online training.
• Once on the shop floor, you will spend the next 3 weeks of training on day shift with the day shift paint assistants.
• When determined, you will be able to start your normal shift

Maskers ensure the application of painting or other coatings is exact - precisely what our customers require. Maskers review blueprints to accurately identify the prep work needed for processing parts, and they apply masking (tape, paper, plugs) to prevent the application of paint or other processing on surfaces that shouldn't be coated. Maskers verify part cleanliness and damage-free surfaces to ensure product quality and customer satisfaction.

This position is classified as safety-sensitive.

This role is identified as requiring ITAR (International Traffic in Arms Regulations) compliance; therefore, qualified candidates must meet the definition of a U.S. Person (per EAR Part 772 and ITAR 120.15):

• An individual who is granted U.S. citizenship, or
• An individual who is granted U.S. permanent residence (i.e., a "Green Card" holder), or
• An individual who is granted status as a "protected person"

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.

• Reads and interprets blueprints to determine required work procedures and identify materials required
• Using cleaning fluids, solvents, brushes, scrapers, sandpaper, cloth, and/or steam, cleans surfaces of work pieces in preparation for coating
• Follows established work instructions and safety procedures including the proper use of all required personal protective equipment (PPE) and the use, storage, and disposition of hazardous materials
• Uses precision measuring tools such as calipers or other gauges to determine areas needed for masking according to blueprints or drawings
• Uses precision cutting tools such as x-acto style blades/knives to accurately shape masking materials, including tiny materials and hard-to-reach areas requiring manual dexterity with sometimes very limited access
• Applies masking or other such materials to ensure surfaces are protected during processing procedures
• Rinses, drains, and/or wipes coated work pieces to remove excess coating material or to facilitate the setting of finish coats on work pieces
• Demasks and cleans parts as required after coatings or processes have been performed, paying close attention to ensure masking materials applied were correct and adequate in meeting customer/drawing requirements
• Perform other incidental duties as may be required
• Regular attendance on-site at the workplace is required

• A high school diploma or GED equivalent is required
• Experience in precision masking or similar is preferred

• Experience reading and interpreting blueprints; experience interpreting finish specs is preferred
• Precise dexterity and the ability to apply masking in small places and to make precise cuts using an X-acto or similar pointed blade is required
• Hand strength and stability to effectively and accurately use precision cutting instruments is required

To perform the essential functions of the role, employees must be able to perform the following activities with or without reasonable accommodations:

• Regularly stand and walk throughout the facility,
• Sit for long periods to perform job duties
• Regularly lift, carry (short distances), and push/pull up to 50 pounds using peer assistance and/or other lifting & material-handling equipment for heavy or oversized parts
• Frequently reaches overhead and reaches out or down to perform duties
• Occasionally climbs steps, stairs, or ladders
• Occasionally bend, crawl, stoop, squat, or kneel
• Frequently uses hand or fingers to manually inspect parts, apply and remove masking materials, and operate precision cutting tools
• Accurately distinguish colors
• Visual acuity to interpret drawings, sketches, and readings on gauges and other measuring devices, and to ensure precise application of masking materials

Work is performed in a manufacturing shop environment where working conditions may vary…