Utilities Repair
Listed on 2026-10-17
-
Trades / Skilled Labor
Maintenance Technician / Mechanic
This posting is for a position at the City of Port Huron Water Filtration Plant (WFP).
Note:
This is a technical position by nature and will require the individual to have a mechanical aptitude. A mechanical / machining / welding aptitude test may be required, as well as, a welding skills test.
To perform a variety of semi-skilled and skilled activities in the repair, maintenance or rebuilding of mechanical and electrical equipment; to perform related work as required.
SUPERVISION RECEIVEDWork is performed under the supervision of the Wastewater Treatment Plant (WWTP) Supervisor I or the Water Filtration Plant (WFP) Supervisor I or other designated official.
TYPICAL EXAMPLES OF WORK- Adjust, repair and replace parts in electric motors and motor starters.
- Operate drill presses, grinders, pipe cutters and threaders, electric welding equipment, welding and cutting torches, and a variety of hand tools.
- Operate lathe and Bridgeport to fabricate and/or repair needed parts and equipment within designated tolerances.
- Perform routine electrical repairs.
- Make repairs to blowers, sludge pumps, grit collectors, scum collectors, chemical feeders, and rotary screen thickeners.
- Lubricate plant machinery, change oil and filters when necessary.
- Remove, replace and clean large iron piping.
- Use hoists and pulleys in moving and installing heavy equipment.
- Disassemble and repair pumps, valves, compressors and other mechanical equipment.
- Operate trucks and other mechanical equipment as required.
- Disassemble and make repairs to hot water supply systems.
- Paint wood, metal or masonry as required.
- Repair cement work.
- Clean and replace electrodes and probes.
- Clean, unplug, repack and lubricate pumps.
- Service remote pumping stations and generators.
- Replace bushings and bearings on equipment and machinery.
- Perform building and grounds maintenance work as required.
- Prepare records and reports.
- Perform inspections and calibrations on precision machinery using precision mechanical measurement devices.
- Repair pneumatic operation cylinders and related control equipment.
- Must be able to climb/descend ladders and stairs up to a height of 150 feet. (e.g. Water Tower)
- Ability to work at heights up to 150 feet. (e.g. Water Tower)
- Order parts and materials, as needed.
- Perform related work as required.
- Thorough knowledge of the tools, materials, methods and practices used in the repair and maintenance of mechanical and electrical equipment.
- Knowledge of welding techniques; electric and gas, with the ability to fabricate as needed.
- Demonstrate a thorough attainment of mechanical skills and aptitudes.
- Physical agility; ability to climb ladders and enter confined spaces safely and with ease.
- Ability to read and understand mechanical drawings and electric schematics.
- Initiative and resourcefulness in solving mechanical problems and evaluating the performance of simple and complicated machinery.
- Ability to prepare accurate records.
- Knowledge of safety equipment and practices used when working with hazardous chemicals, gases, or wastewater constituents, including full-face respirators and hazardous gas detectors; ability and knowledge to implement local and MIOSHA safety requirements while working in enclosed spaces and with hazardous chemicals or gases.
- State of Michigan Complete Treatment Certification, F3 or higher, for the Water Filtration Plant.
- State of Michigan Municipal Operator Certification, Class D or higher, for the Wastewater Treatment Plant.
- Ability to work effectively with the public and other employees.
An employee in this class, upon appointment, shall have the equivalent of the following training and experience:
- Graduation from an accredited high school.
- Reasonable…
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).