Walk-in Sand​/Shotblaster - Deer Creek

Country United States of America

State / County Oregon

City Milwaukie

Division Structurals

Company Deer Creek (DCA)

Function Operations

Workplace Type On-Site

Position type Full Time

Opportunity 24707

To clean the surfaces of large castings using air-propelled sand or shot in a walk-in booth. To prepare casting surfaces for further cleaning, chemical milling, inspection or gate removal. Walk-in Shot blasters remove shell materials and Walk-in Sandblasters prepare casting surfaces for further inspection.

Objective: to remove shell, scale, grinding marks and other material from castings.

• A. Verifies lot, part identification and operation number.
• B. Loads castings into walk-in cabinet manually or with hoist.
• C. Masks tooling points as needed.
• D. Sand or shot blasts parts in cabinet by directing hand-held nozzles; moves nozzle across surface or parts; avoids taking off too much metal by not directing sand or shot at one area too long.
• E. Removes all sand or shot out of part cavities to assure clean parts for chemical milling or subsequent operations.
• F. Visually inspects blasted parts to verify removal of materials and uniform color of parts.
• G. Removes castings from walk-in cabinet and places on pallets.
• H. Modifies shotblast pipe as necessary. (Walk-in Shot blasters only)
• I. Manually pushes sand into grate to circulate. )

Marginal Job Function

J. Operates sand or shotblast machine from outside cabinet by foot control.

Objective: to maintain equipment in good working order and maintain clean work area.

• A. Performs minor equipment maintenance, including changing hoses and nozzles.
• B. Checks equipment and checks for leaks and clogs.
• C. Restocks cabinet with sand or shot; orders materials as needed.

Objective: to take responsibility for and demonstrate safe work practices.

NOTE:

for job positions that require respiratory protection (more than a filtering face piece – dust mask):

In compliance with the Oregon Occupational Safety and Health Division Personal Protective Equipment standard for Respiratory Protection, OAR 437, Div. 2/I  and Oregon Health Division Rules for the Control of Radiation, OAR 333. Div. 120  through 330), certain tasks within this job position require/may require the use of a NIOSH-approved respirator. An individual will not be assigned to these tasks if the person is not able to work under these conditions.

Respirator selection will be based on the work performed, exposure information, duration of use and any other relevant factors. If a tight-fitting respirator is required, facial hair, temple pieces on glasses or other items that interferes with the face-to-face piece seal of the respirator are not permitted.

• A. Adheres to plant and department safety rules.
• B. Safely operates all equipment and tools.
• C. Identifies and reports safety problems.
• D. May be required to work with hazardous waste.

5. Performs other tasks as directed.

• 1. Walk-in Shotblast Equipment
• 2. Walk-in Sandblast Equipment
• 3. forklift
• 4. hoists
• 5. pallet jacks
• 6. slings, straps, chains
• 7. basic hand tools (e.g. hammers, wrenches, screwdrivers, etc.)
• 8. dental mirrors and picks
• 9. chisels
• 10. knives
• 12. pipe benders and threader
• 13. belt grinder
• 14. brooms and shovels
• 15. flashlights and flex lights
• 16. magnets
• 17. ladders

• 1. Training is provided on the job.
• 2. PCC's Forklift Driving Safety Certification must be completed.
• 3. May be required to complete Hazardous Waste Management Training.
• 4. Radiation Safety Training must be completed.

• 1. Cleaning and blasting skills as demonstrated by the competent…