Airbus - Quality Assurance Composite Assembly Inspector; Temporary

Position: Airbus - Quality Assurance Composite Assembly Inspector (Temporary)
*
* Job Description:

*
* ** MAIN RESPONSIBILITIES*
* ** Assembly Inspection/Paint Inspection*
*
* * Visual Inspection
*
* * Verify potting material shelf life
*
* * Verify that inserts, components, etc. are installed as per drawing.
*
* * Visual Inspection for improper or insufficient coverage, rough surfaces, pitting.
*
* * Dust inclusions, orange peel, tears, sagging or blistering.
*
* * Inspecting parts  to planned MIDs and Inspection documents , drawings etc.
*
* * Recording of nonconformities and quarantining non conforming parts with red tags.
*
* * Create and maintain inspection plans and procedures.
*
* * Participate and lead  root cause and corrective action process using Rapid 5 Whys, 8D tools etc..
*
* * Perform First Article Inspections to AS9102 requirements.
*
* * Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.
*
* * Serve as a guide to Assembly technicians by sharing requirements and acceptance criteria for Inspection.
*
* * Participate in all initial and recurrent training to maintain certifying staff authorities.
* ** Trim Inspection*
*
* * Verification of tool validity
*
* * Visual Inspection
*
* * Inspection of parts  to planned MIDs and Inspection documents , drawings etc.
*
* * Participate and lead  root cause and corrective action process using Rapid 5 Whys, 8D tools etc.
*
* * Recording of nonconformities & quarantining non conforming parts with red tags.
* ** Shipping Inspection*
*
* * Verify that all inspection stages have been completed.
*
* * Inspecting parts to planned MIDs and Inspection documents , drawings etc.
*
* * Recording of nonconformities & quarantining non conforming parts with red tags.
*
* * Preparation of shipping documentation including Form Ones and C of Cs.
*
* * Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.
*
* * Participate in all initial and recurrent training to maintain certifying staff authorities.
*
* * Participate and lead  root cause and corrective action process using Rapid 5 Whys, 8D tools etc.
* ** Lay-up Inspection*
*
* * Review all materials in kits for shelf life & out life remaining
*
* * Verification that all materials have been cut & identified with ply number & orientation
*
* * Verification that Material Identification Sheets are complete.
*
* * Verification validity of tooling.
*
* * Visual Inspection to planned MIDs and Inspection documents , drawings etc.
*
* * Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.
*
* * Participate and lead  root cause and corrective action process using Rapid 5 Whys, 8D tools etc.
*
* * Serve as a guide to Layup  technicians by sharing requirements and acceptance criteria for Inspection.
*
* * Recording of nonconformities &  quarantining non conforming parts with red tags.
* ** Core Inspection*
*
* * Verification validity of tooling
*
* * Verification of conformity to templates and drawings
*
* * Visual Inspection for damage, cell ruptures, contamination dust /oil
*
* * Inspection of parts  to planned MIDs and Inspection documents , drawings etc.
*
* * Recording of nonconformities & quarantining non conforming parts with red tags.
*
* * Execute inspections to planned weekly and daily KPIs to Assembly Inspection Plans.
*
* * Participate and lead  root cause and corrective action process using Rapid 5 Whys, 8D tools etc.
* ** MINIMUM JOB REQUIREMENTS*
* *
* Education:

*
*
* * College Diploma (Mechanical Engineering Technician or Technologist) or relevant experience
* *
* Experience:

*
*
* * 5 years of composite experience (Manufacturing/Assembly Inspection), specifically with a Quality Assurance System (ISO 9001, AS 9100)
*
* * NDT/Ultrasonic Inspection experience an asset
* ** Knowledge, Skills, Demonstrated Capabilities:*
*
* * Ability to work under broad supervision
*
* * Independent and able to work with a team
*
* * Attention to detail
*
* * Able to manage time effectively and prioritize work
*
* * Professional working relationships with internal and external sources, including regulatory and quality certified agencies
*
* * Able to work under pressure to meet demanding work schedules
*
* * Excellent verbal and written communication skills
*
* *…