Technician II - Fiber traveler

Full benefits available after 30 days of employment! Full-time, direct hire position! In order to be considered for this position you must be willing to be a 100% Full time traveler.

Job Summary: The Technician II - Fiber is responsible for all aspects, of Fiber including but not limited to installing, terminating, testing, and splicing. General

• The Technician II - Fiber must have basic copper termination skills
• The Technician II - Fiber will install a work area outlet for the floor, modular furniture, and wall (terminate CAT 3 & CAT 5 jacks. Mount faceplates and surface mount boxes correctly. Adhere to IES COMMUNICATIONS labeling standards).
• The Technician II - Fiber will build closets (Mount and install backboards, cross-connects, racks, patch panels, fiber optic, and hardware). Install grounding for racks, equipment, and cable as required. Complete all IDC connections (e.g. terminate 110/66 blocks and patch panels).
• The Technician II - Fiber performs testing, continuity test horizontal and riser cable, use of volt-ohmmeter, troubleshoot opens, crosses, shorts, and transpose pairs on horizontal and riser cable.
• The Technician II - Fiber installs LC, SC, ST, FC, FDDI, SMA, and MPO/MTP connectors, for both multi-mode & single-mode fiber
• The Technician II - Fiber will terminate simplex & duplex jumper cord
• The Technician II - Fiber will terminate & breakout outside plant (loose tube) fiber (e.g. Corning/Commscope)
• The Technician II - Fiber will terminate & breakout outside plant (loose tube) fiber (e.g. 3
  
  DNX)
• The Technician II - Fiber will terminate indoor tight buffered multimode and single-mode fiber
• The Technician II - Fiber will install fan‑out kits including buffer tube
• The Technician II - Fiber will calculate the end‑to‑end loss budgets in accordance with TIA/EIA standards for multimode & single-mode fiber
• The Technician II - Fiber will fully complete all IES paperwork accurately and on time specifically, timesheets, material transfers, work orders, change orders, Job Blog, tool transfers and others as required
• The Technician II - Fiber will complete any other duties as assigned
• The Technician II - Fiber will test using an OTDR, Fluke DTX 180
• The Technician II - Fiber troubleshoots using an OTDR to identify and correct problems end to end, and Network‑wide Splicing
• The Technician II - Fiber will perform mechanical splicing with all types of fiber cable
• The Technician II - Fiber will perform fusion splicing with all types of fiber cable
• The Technician II - Fiber performs building entrance splices, maintenance space, and direct buried splices

Min USD $25.00/Hr. Max USD $35.00/Hr.

• The Technician II - Fiber must be self‑motivated, positive in approach, professional, and help create, develop, and implement project process improvement(s).
• The Technician II - Fiber must promote the Company culture and mission to all employees, vendors, clients, and business partners.
• The Technician II - Fiber must possess and be proficient with the listed tools.
• The Technician II - Fiber must be able to act as the Company liaison for interface with customer representative(s).
• The Technician II - Fiber must possess proven problem‑solving skills, critical thinking skills, and the ability to effectively read, write, and give oral presentation(s).
• The Technician II - Fiber must be able to work at heights, off of a ladder, and in confined spaces, lift up to 50 pounds and move up to 75 pounds.
• Must be able to stand and walk very large job sites regularly.
• The Technician II - Fiber must be able to see and distinguish different colors, read the small print, and hear and recognize audible signals such as dial tones.
• The Technician II - Fiber must be able to travel within the branch territory and/or regional territory as needed.
• Regular attendance is mandatory

• Must possess a High School diploma or GED equivalent
• Must possess and be proficient with the listed tools.
• Must be proficient at terminating all connector types and methods for SMF and MMF systems (Unicam, anaerobic, heat‑cure)
• Must have Testing &…