CMM Programmer

CMM Programmer

Company:
Martinic Engineering Inc

Primary

Location:

8505 West McDowell Road, Tolleson, AZ 85353 USA

Workplace Type:
On‑site

Employment Type:

Hourly | Full‑Time

Function:
Quality

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

• Advanced programming skill using a Global (Hexagon) CMM (PC‑DMIS) and validate them in accordance with customer specification.
• Assist manufacturing engineering with part inspection problems.
• Read blueprints or engineering specifications to obtain product information, such as specified material, surface finish, and dimensions. Calculate blueprint dimensions.
• Compare surface finish of work piece to finish on set of standard blocks making fingertip touch comparison to ensure production of specified surface finish.
• Measure dimensions, such as length, height, and distance, between reference points, using precision instruments such as micrometers, calipers, dial indicator, and snap gauge, to ensure product meets specifications.
• Locate reference point on part and measure dimension such as angle, arc, and radii, using combinations of aids, such as surface plate parallel bars, angle plates, gauge blocks, V blocks, sine bars, and precision measuring instrument.
• Perform first article, in‑process and final inspections. Ensure that only acceptable product moves to the next operation and/or shipped. Ensure that all products have passed all inspection, test requirements, and that appropriate records are maintained.
• Ensure that any product that fails any portion of the detailed inspection plan or test requirements are communicated, tagged, and appropriate records are maintained.
• Report findings to their Manager and work with appropriate functional areas to resolve discrepancies.
• Verify quantity, customer part number and revision to the PO, MOT, and Blueprint
• Responsible for day‑to‑day planning of product through the department.
• Responsible for visually inspecting parts for FOD and other handling abuse.
• Prepare FAIR/DIP (First Article Inspection Report/Detailed Inspection Plan) and bubbles blueprint.
• Possess a thorough understanding of the ballooning software DISCUS.
• Substitute known values, such as dimensions from blueprints into standard formulas and solve for unknown quantities using knowledge of algebra, trigonometry, or geometry to determine dimensions not specified in blueprints.
• (May) Calibrate in‑house equipment and/or schedule for the calibrated equipment to be outsourced.
• (May) Maintain calibration equipment list, records of calibration results, and reports discrepancies to management.
• (May) Set up and try out inspection equipment to ensure accuracy.
• (May) Test hardness of work piece surface, using hardness testing machine.
• May be required to follow other job‑related instructions and to perform other job‑related duties as requested, subject to all applicable state and federal laws.

• Identify and document any quality related problems.
• Inform management of the situation through designated organizational channels.
• Recommend, initiate, or provide solutions to the problems through the corrective and preventive action program.
• Verify that the proper corrective and/or preventative action to the problem is implemented by management.
• Control further production, processing, or delivery of a product until a quality Defect is corrected or resolved by management.
• Adhere to company QMS documented procedures/process and report changes through our Document Change Request process.
• Report to management any training needs identified.
• Provide a venue for continuous improvement.

• A minimum of 5 years experience as a CMM Programmer in an Aerospace environment
• Knowledge of AS9100 certified quality systems
• Ability to complete First Article inspections and customer required reports
• Ability to operate/ program CMM both manual and PC‑DMIS based, profilometer, and comparator.
• Capable of calculating blueprint dimensions.
• Able to read manufacturing blue prints.
• Knowledge and capability to interrupt specifications.
• Familiar with outside processing such as plating, heat treat, anodize, etc.
• Familiarity with and ability to use standard inspection…