CMM Programmer

Join to apply for the CMM Programmer role at Martinic Engineering

Company:
Martinic Engineering Inc

Primary

Location:

8505 West McDowell Road, Tolleson, AZ 85353 USA

Workplace Type:
On-site

Employment Type:

Hourly | Full-Time

Function:
Quality

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

• Advanced programming skill using a Global (Hexagon) CMM (PC-DMIS) and validate them in accordance with customer specification.
• Assist manufacturing engineering with part inspection problems.
• Read blueprints or engineering specifications to obtain product information, such as specified material, surface finish, and dimensions. Calculate blueprint dimensions.
• Compare surface finish of work piece to finish on set of standard blocks making fingertip touch comparison to ensure production of specified surface finish.
• Measure dimensions, such as length, height, and distance, between reference points, using precision instruments such as micrometers, calipers, dial indicator, and snap gauge, to ensure product meets specifications.
• Locate reference point on part and measure dimension such as angle, arc, and radii, using combinations of aids, such as surface plate parallel bars, angle plates, gauge blocks, V blocks, sine bars, and precision measuring instrument.
• Perform first article, in-process and final inspections. Ensure that only acceptable product moves to the next operation and/or shipped. Ensure that all products have passed all inspection, test requirements, and that appropriate records are maintained.
• Ensure that any product that fails any portion of the detailed inspection plan or test requirements are communicated, tagged, and appropriate records are maintained.
• Report findings to their Manager and work with appropriate functional areas to resolve discrepancies.
• Verify quantity, customer part number and revision to the PO, MOT, and Blueprint
• Responsible for day-to-day planning of product through the department.
• Responsible for visually inspecting parts for FOD and other handling abuse.
• Prepare FAIR IP (First Article Inspection Report etailed Inspection Plan) and bubbles blueprint.
• Possess a thorough understanding of the ballooning software DISCUS.
• Substitute known values, such as dimensions from blueprints into standard formulas and solve for unknown quantities using knowledge of algebra, trigonometry, or geometry to determine dimensions not specified in blueprints.
• (May) Calibrate in-house equipment and/or schedule for the calibrated equipment to be outsourced.
• (May) Maintain calibration equipment list, records of calibration results, and reports discrepancies to management.
• (May) Set up and try out inspection equipment to ensure accuracy.
• (May) Test hardness of work piece surface, using hardness testing machine.
• May be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws.

Each Martinic Engineering Employee, as applicable to their particular work area and in accordance with the quality policy, has the additional duty and responsibility to:

• Identify and document any quality related problems.
• Inform management of the situation through designated organizational channels.
• Recommend, initiate, or provide solutions to the problems through the corrective and preventive action program.
• Verify that the proper corrective and/or preventative action to the problem is implemented by management
• Control further production, processing, or delivery of a product until a quality defect is corrected or resolved by management.
• Adhere to company QMS documented procedures/process and report changes through our Document Change Request process.
• Report to management any training needs identified.
• Provide a venue for continuous improvement.

• A minimum of 5 years experience as a CMM Programmer in an Aerospace environment
• Knowledge of AS9100 certified quality systems
• Ability to complete First Article inspections and customer required reports
• Ability to operate/ program CMM both manual and PC-DMIS based, profilometer, and comparator.
• Capable of calculating blueprint dimensions.
• Able to read manufacturing…