Coating Console Operator

Responsibilities

• The purpose of the Coating Console Operator is to be responsible for complete control of the oven. Start and stop all motors, fans, exhaust, tenter, pre-tenter, and other equipment pertaining to the operation of the coater.
• Must be able to adjust speeds and synchronize the speeds of the applicator, pre-tenter, and tenter for proper tensions and speeds.
• Observe the level of latex in the application area. Control levels for proper applications.
• Make necessary adjustments of rolls and doctor bars on the applicator to apply latex properly. Make necessary adjustments for style changes.
• Assume responsibility to have a proper amount of latex applied to give quality products.
• Co-directs and instructs coater personnel in changes necessary for the correct operation of equipment.
• Assist in cleaning of applicator rolls and pans each day and also weekend cleaning.
• Works closely with coater supervisor for proper application and performance of the coater range.
• Get cup weight of latex, record, and make adjustments.
• Advise supervisor of improper performance of the equipment.
• Observe the pinning of the carpet at the pre-tenter and make necessary adjustments.
• Keep work area clean.
• Knowledge of the Mahlo Bow Straightener. Align patterns properly.

• Lifting is required on cups, and buckets weighing approximately 25 lbs. 30 times per shift.
• Standing is required but varies per shift 4 to 12 hours.
• Reaching is required for cups, buckets, and tools approximately 40 times per shift.
• Stooping is required for cups, buckets, and tools approximately 40 times per shift.
• Bending is required for cups, buckets, and tools approximately 40 times per shift.
• Must be able to use wrenches.

• High school diploma or equivalent preferred.
• Must be able to read and write and do basic addition, subtraction, division, and multiplication.
• Computer knowledge or data entry skills are a necessary part of the job.

• Overtime is required on occasion.
• All accidents must be reported immediately.
• Perform any other duties as assigned.
• Safety equipment must be worn as required and requirements must be followed for all areas.
• Report to management any quality, safety, or potential problems encountered while performing the job.
• Responsible for quality and safety of his/her own output.