Combo Welder

A Combo Welder will weld, fabricate and assist pipe fitters, boilermakers, millwrights, and ironworks in the installation of varying types of equipment and supports for industrial pipe, structural, and mechanical systems.

• Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques.
• Layout, position,aligns, cut, assemble, and fit metal components together in various body positions and in various places.
• Bolts, clamps, and tack-welds parts to secure in position for welding.
• Sets up equipment and welds parts, using arc, gas-shielded arc, submerged arc, or arc gas welding equipment.
• Weld metal materials to piping systems equipment using the appropriate welding procedure for the various equipment and metal types involved.
• Identify all equipment for job and process.
• Identify all safety risks and requirements.

• Must have 4+ years welding experience on industrial size and grade pipe. (Schedules: 40, 80, and 160)
• Must pass company welding qualification tests.
• Must be able to read blueprints and other engineering drawings to efficiently perform work.
• Must be able to read and interrupt technical manuals as applicable.
• Must have knowledge of welding machine set up.
• Must have the ability to weld in 2g, 4g, and 6g positions.
• Must be able to Stick and Tig weld on pipe.
• Must be able to make weld repairs to pipe.
• Must have thorough knowledge of various metalscharacteristicand qualities including the correct welding processes required and the effects of welding on the material.
• Must have experience welding multiple types ofpipesincluding but not limited to: carbon steel, stainless, and chrome.
• Must be able to assist pipe fitters in pipe installation, preparation, and fabrication while not actively welding.
• Musthave reliable transportation.
• Must be able to work at heights as required.
• Commitment to DCD values and safety rules and regulations.
• Must meet all physical demands (see section below).
• Takes full ownership of responsibilities and executes independently with minimal supervision after initial scope and expectations are established

• Must have 4+years welding experience.
• Must pass company welding qualification tests.
• Must have the ability to weld in 2g, 4g, and 6g positions.
• Must be able to Stick and Tig weld on Pipe.
• Must have allrequiredknowledge, skills, and abilities.
• Must be able to meet all physical requirements.
• Must have all required tools upon start date.

• Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting, and lifting.
• Will talk and hear to communicate.
• Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long periods of times up to 12 hours a day.
• Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls, and tools.
• May be required to lift, carry, and move up to 50lbs.
• Willwork at heights, climb ladders and stairways, and may occasionally work off platforms using the appropriate fall protection requirements.
• Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and leather work boots.