Ironworker Fabricator​/Boilermaker

Job Description

Ability to take lead in erection of steel, fabrication, grid layout, rigging ect.

Ability to perform all job duties of craft trade.

• Drawings

Ability to read, understand IFC drawings.

Ability to make hang list, read details off drawings, read all notes on drawings before erection, locate and understand ECN's and holds on drawings.

Understand when to stop production work and when a RFI needs to be initiated.

Read and understand craft specs and cut sheets, craft spec procedures and recommendations

Able to locate piece marks for correct views and know how to pick out different elevations

Being able to know the correct installation based on the orientation.

Knowledge of symbols based on legend

• Rigging

Knowledge of all types of safe rigging practices (chokers, slings, ect.)

Ability to dictate correct knots based on material

• Connection

Know all aspects of connecting

Correct procedures of Bolting

Torque vs Tension

• Fabrication

Ability to read cut sheets

Lay out from drawing

Cut material from lay out and cut sheets

• Torque vs. Tension

Knowledge of Torque and Values

Knowledge of Tension

Turn of the nut method

Different types of indicators

Understand how to use a skidmore

• Plan work and execute
• Ability to take drawings, required material, line out helpers and execute work
• Tools and knowledge

Knowledge of specialty tools (torque wrench, skidmore, torque guns, mag drills, hogan drills)

• Welding and cutting

Basic knowledge of welding (machine set up, Mig, stick, gas, ect)

Knowledge of cutting torch, set up, dangers, usage, cleaning, types of tips and when to use the different types of tips

• Equipment Knowledge

Knowledge of JLG's man baskets, cranes

Basic maintenance (inspections)

Safe operations practices

• Signaling of equipment (ERTS, NCCO, NCCER)

Flagging of cranes, forklifts, manlifts

• Knots

Tying knots for tag lines, ect

Basic knots for lashing

• Math Skills
• Footage, addition, subtraction, multiplication, division, fractions to perform all craft duties.

Position Responsibilities

• Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required.
• Identify all tools required for tasks.
• Identify safety risks and the precautions required to eliminate those risks.
• Fabricate equipment according to blueprints or instructions from supervisors.
• Hoist equipment and tools into location via bull rigging or crane.
• Verify vertical and horizontal alignment of structural-steel members, using plumb bobs, laser equipment, transits, and/or levels.
• Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
• Bolt aligned structural-steel members in position for permanent riveting or bolting.
• Pull, push, or pry iron/steel equipment into approximate positions for bolting into place.
• Cut, bend, and weld iron/steel pieces, using metal shears, torches, and welding equipment.

Qualification Highlights

• Must have 4+ years experience as a Iron-worker/ Structural Iron-worker, Boilermaker, and Fabricator.
• Must know how to fab steel.
• Must posses all Knowledge
  
  Skills and Abilities
  
  for positions (see below).
• Must be able to meet all physical requirements.
• Must be able to work at heights in excess of 300 ft.
• Must have all required tools.
• Must have reliable transportation.

Physical Requirements

• Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, work off of platforms and man lifts, and may occasionally work out on an open structure using the appropriate fall protection requirements.
  
  Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and leather work boots.

** CERTIFICATIONS AND/OR LICENSES REQUIRED**

NCCER - Must have Industrial Ironworker, Boilermaker, and Fabricator certifications.

Must have valid DL and reliable transportation.

ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.

• Job Identification 14427
• Locations 602 Copper Rd, Freeport, TX, 77541, US
• Job Schedule Full time