Bending Helper

This job is at the Port Allen Pipe Fabrication Shop and NO PER DIEM is offered

Works a 5 am to 3:30 pm or 3:30 pm to 1:30 am shift under the direction of a foreman. Measures and cuts pipe to the specified length called out on a sketch.

• Read and sign off on JSA prior to starting shift.
• Interpret sketches and identify all grades of material listed.
• Transfer heat numbers from pipe to sketch when required.
• Good math skills required (addition and subtraction of dimensions).
• Read a tape measure.
• Perform preventative maintenance such as greasing.
• Perform daily inspection ensuring safety guards are in place and checking for leaks in hydraulic hoses, air lines and torch cutting equipment.
• Operate plasma and/or oxy‑fuel cutting equipment.
• Maintain a clean and safe work environment at all times.

• Must be able to work a 5 am to 3:30 pm shift or 3:30 pm to 1:30 am.
• Preferably one (1) to two (2) years of experience in specified skill.
• MUST be able to read a tape measure.
• Ability to layout and cut pipe or ability to learn.
• Capable of working in a team setting.

Post‑offer drug/alcohol screen and physical evaluation.

Job site personal protective equipment requirements include hearing protection, safety glasses, long sleeve shirt, gloves, steel‑toe boots, etc.

• Climbing ladders, scaffolds, and structures above and below ground level.
• Maintaining balance on ladders, scaffolds, structures.
• Reaching in all directions, handling and manipulating objects and materials.
• Coordinating eye, hand, and finger movements to operate tools and equipment.
• Lifting 30 to 50 pounds from ground level, waist level, and/or overhead.
• Carrying objects, tools, equipment, standing, sitting, walking, pushing, pulling, bending, kneeling, crouching/squatting, crawling.
• Seeing with or without correction, hearing with or without correction.

• Follow set procedures and standards.
• Apply basic mathematical skills.
• Plan work and select proper tools.
• Compare and understand differences in size, shape, and form of lines, figures and objects, picturing and evaluating solid objects from drawings or diagrams.
• Use standards that can be measured or checked.
• Judge distances and slopes accurately.
• Follow oral and/or written directions.
• Read and write.
• Recognize and report safety hazards.

• Location:
  
  industrial construction sites and/or fabrication shop.
• Mobility barriers: uneven ground levels, obstructed pathways, work performed at low and/or high elevations, work performed in confined areas.
• Climatic/environmental conditions: outdoor climate; exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment; potential exposure to chemical substances.

• Individual may be required to perform a task outside normal operation as required by the company or foreman, owing to job demand.

Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.