Electronics Test Technician - 1st 2nd or 4th shift Security Clearance

Position: Electronics Test Technician - 1st 2nd or 4th shift with Security Clearance
Location: Sykesville

RELOCATION ASSISTANCE:
No relocation assistance available CLEARANCE REQUIRED FOR START:
No CLEARANCE TYPE:
Secret TRAVEL:
Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon.

We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.

In the Mission Systems sector, you'll join our experts in developing systems and solutions that keep our world safe. Northrop Grumman Mission Systems is looking for you to join our team as an Electronics Test Technician based out of Sykesville, Maryland. We are looking for individuals who are interested in expanding their skills and knowledge in electronics on 1st, 2nd or 4th shift.

* 1st shift starts around 7am (Monday - Friday). 2nd shift starts around 2pm (Monday-Friday). BUT there are Monday-Thursday (4/10), Tuesday-Friday (4/10), & 9/80 options for both shifts.

* 4th shift runs 7am to 7pm (Friday-Sunday only).

* There is some flexibility around start times.

* There is a differential (higher pay) for 2nd shift. A security clearance is not required to apply to or to start this job. The selected candidate will be processed for a security clearance after she/he starts the job. What You'll Get To Do:
The selected candidate must be able to apply electronic principles to test and troubleshoot complex circuits and devices for circuit cards, sub-assemblies, and large cabinet systems. The Electronics Test Technician should also be proficient at using a broad range of measuring and monitoring equipment (e.g., oscilloscopes, function/waveform generators, counters, power supplies, multi-meters, current sensors, voltage/current probes, etc.) to both perform the tests as specified and to troubleshoot down to the component level.

The Test Technician will perform acceptance test procedures that verify equipment function. This includes, but is not limited to, the following:
* Selection, setup, calibration, and operation of simple to complex equipment and facilities over a broad spectrum of technologies in the process of testing a unit.

* Verification and validation of product and paperwork configuration, test processes, and test equipment setup, configuration, and calibration.

* Measuring, collecting, and recording electrical performance data as required by the test specifications, as well as performing analysis and evaluation of the data to the test specification requirements.

* Preparing accurate and complete test reports of all recorded data for government submittal.

* Troubleshooting of systems, devices, test tools, processes, and/or test setups to locate and repair defective areas. Acceptance Tests performed include, but are not limited to, the following:
* Programming and Verification of Firmware, Software, and Programmable Logic Devices (PLD).

* Verification of assembly point-to-point wire/trace connections (Circuit Check) using either a wiring tabulation, wiring diagram, or schematic.

* Performance of Insulation Resistance and Dielectric Strength Tests to determine the effectiveness of the component or product's insulation.

* Performance of Manual and Automated Full Load (Burn-in) tests.

* Performance of Manual and Automated Functional, Operational, and System Tests.

* Performance of other miscellaneous tests (e.g., Thermal, Liquid Cooling, Fiber Optic, etc.). Test Technicians may be asked to support engineering efforts including:
* Assisting engineers in performance of design verification tests including the setup and operation of test equipment.

* Performing initial procedural tests on new and/or changed equipment to verify that the tests can be performed as specified.

* Performing maintenance and integration of peripherals.

* Performing Test Tool Calibration and Certification/Verification.

* Verifying schematics, diagrams, and wiring tabulations for product and test tools.

* Building/Constructing test tools and stations using schematics, diagrams, and wiring tabulations. Duties will be performed onsite or at domestic/international locations while on field service assignment as required. Travel is only up to 10%.

Basic Qualifications:

* Ability to work 1st, 2nd or 4th shift

* High School diploma and an additional 6 years of relevant education and/or experience

* Associate of Science degree or higher (or Technical degree) in electronic technology or electronics focused major OR graduate of a two-year,…