Construction Building Inspector

REPORTS TO:

DIRECTOR OF FACILITIES, CONSTRUCTION AND MAINTENANCE.

This is responsible technical work consisting of field inspections during construction, alterations, or repairs on all types of structures to enforce code compliance. Additional responsibilities include review of amendments and other changes to construction documents. This position shall serve as a liaison with local governmental agencies, utilities and contractors. Work is performed under the guidance of the Building Official.

• Education: Graduation from a standard high school or an equivalency diploma.
• Experience: Minimum five years of verifiable successful experience either as a commercial building code inspector and/or plans examiner, licensed building contractor, graduate architect, or Florida registered architect., or electrician, carpenter, plumber, or HVAC mechanic.
• Computer
  
  Skills:
  
  Basic understanding and knowledge of use of current technology, as required for the position. Experience in data entry and Microsoft Suite.
• Certificates and/or Licenses
  :
  Must be a certified Standard Building Code Inspector in one of the following classifications:
  Building/Structural, Mechanical, Electrical, Plumbing, or Fire in accordance with Chapter 468 Part XII of the Florida Statutes or be able to obtain certification as such within eleven months from the date of hire.
• Must have certification in the State Requirements or Educational Facilities (SREF) per Section 453 of the Florida Building Code or be able to obtain certification within eleven months from the date of hire.
• Must possess a valid Florida driver's license or obtain within 30 work days and the ability to drive.

- The worker is subject to atmospheric conditions. One or more of the following conditions may affect the respiratory system or the skin: fumes, odors, mists, gases, or poor ventilation.

• Heat
  :
  The worker is subject to extreme heat. Temperatures are above 100 degrees for periods of more than one hour.
• Indoors/Outdoors
  :
  The worker is subject to both environmental conditions. Activities occur inside and outside.
• Noise
  :
  The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level.
• Vibration
  :
  The worker is subject to vibration. There is exposure to oscillating movement of the extremities and/or the whole body.

M-Medium Work - Required to push, pull, or lift from 20 to 50 pounds of force occasionally and/or 10 to 25 pounds of force frequently and/or a negligible amount of force constantly to move objects. May be required to wear safety harness work in confined spaces, trenches, and work on scaffolds or ladders.

These examples are intended only as illustrations of the various types of work performed in a position allocated to this class. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position:

• Employees hired for this position must be capable of performing the essential functions of this job description with or without reasonable accommodation.
• Manifest a professional code of ethics and values at all times.
• Support activities designed to achieve priority goals identified through the District's strategic plan.
• Become familiar with all project related construction documents and submittals for compliance with all applicable building codes, State Requirements for Educational Facilities (SREF) design intent of approved construction documents, and other regulatory standards.
• Inspect all of the District's construction projects during the following construction phases as required by Florida Building Code and State Statutes for the applicable license held by the employee. o
• Building/Structural: inspect and review soil compaction or driving of piles for foundation, parking lots, grades, drainage, egress to and from structures; concrete foundations, slabs, walls, tie beams and forms; structural steel framing, bracing and connections; roof structures, sheathing and coverings; and life safety items including means of egress, handrails, stairs, elevators, and hurricane resistance; building finishes.
• Mechanical: inspect all heating, ventilating, air conditioning system including mechanical units, ductwork, piping and life safety items related to mechanical systems; all refrigeration, cooking, gas and electric appliances,…