Milling Machine Operator

Description

We are currently seeking a skilled and reliable Mill Operator to join our team. This is a great opportunity for individuals who enjoy working in a fast-paced environment and are looking to contribute to the success of our organization.

Responsible for running various milling machines. This involves tasks related to set-up, machine operation, and disposing of chips as required.

• The employee is responsible for changing cutters on this machine on average 2 to 6 times per night.
• Heavier cutters are only changed two times per shift.
• Cutters vary in weight from 10 to 80#s-milling flats, key ways, dowel holders, etc.
• The lighter cutters are located around the machine, while cutters that weigh more than 40# are in a tool room approximately 75 feet away. They are placed between floor and 27 inches off the floor on shelves.
• The employee is responsible for taking the cutter from the shelf to dolly and then wheeling it over to the machine.
• A jib crane can be used to lift the heavier cutters to the machine, while lighter ones are mounted by hand.
• While mounting the cutter, the employee needs to stand on an 18 inch step and place the cutter sideways below waist level. A space of 20 inches is available if the employee wants to put the cutter in from the front.
• The cutter then needs to be locked into place by using an Allen bolt and needs to be done from the side as well.
• Can also be required to place 20# puck and push V-blocks into place. Required to tighten parts using a large wrench on an infrequent basis during the shift as well.
• Must monitor machine operation carefully due to close tolerance of machine operation.

• The chips on this machine need be shoveled form one side of the machine to the other at knee level.
• Once the chips have been moved to the other side, they are shoveled once again into a large bin. Approximately 30-40 shovels full of chips are moved during a shift. This is split between 2-3 occasions in the entire shift.
• Utilize check sheet for preventative maintenance.
• Keep area clean, sweep, pick up debris, etc.
• Check off paperwork associated with each job.

Note:

This job description is not intended to be all-inclusive. The employee may be required to perform other duties as assigned.

• High school diploma or equivalent is required.
• A.S. or B.S. in engineering or related degree is preferred.