Electronics Test Technician

PROOF OF U.S. CITIZENSHIP REQUIRED

Schedule: Monday - Thursday, 7:00 AM - 4:30 PM;
Friday, 7:00 AM - 11:00 AM

Use a variety of tools and equipment to align, test, troubleshoot, and repair electronic devices.

• Repair units to the component level that fail production acceptance testing.
• Determine root cause of failure.
• Perform rework to eliminate root cause(s).
• Retest the reworked unit, passing production acceptance testing to the same level criteria as a non-reworked unit.
• Appropriately balance amount of time invested troubleshooting with the board value/BOM cost (collaborate with supervisor & engineering on when to scrap, etc.).
• Maintain required documentation on all activities.

• Ensure workstation is in proper working order (clean, well-lit, tools ready, personal protective equipment applied, etc.).
• Review paperwork such as BOMs, Work Orders, wiring charts, engineering drawings, diagrams, etc. for each project.
• Follow all established test procedures for Navigation Aids (NAVAIDS), Surveillance Radios, and other products.
• Perform tests on Digital, Analog, and RF Circuits down to the component level or up to the top system level.
• Perform testing on a variety of parts, pieces, components, sub-assemblies, assemblies, modules, and systems.
• Perform a variety of test types including pre-tests and final acceptance tests.
• Use a variety of Electronic Test Hardware:
  Multimeters & Digital Multimeters, Power Meters, Oscilloscopes (100 MHz - 2 GHz), Frequency Counters (2 GHz), Spectrum & Vector Signal Analyzers (2-6 GHz), Network Analyzers (1.5 GHz), Signal Generators (Vector, Pulse, or Function), Peak & Average Power Meters, Commercial Off-the-Shelf Test Equipment (COTS), etc.
• Verify systems and sub-systems meet industry and customer specifications.
• Meet deadlines per agreed-upon Scope of Work documentation to ensure timely product delivery.
• Interface with Engineering and Production departments for product reliability.

• Knowledge of RF circuit theory.
• Experience working with Electronic Test Equipment (Hardware and Software).

• AA Degree in Electronics Technology or equivalent is desired.
• Minimum 18 months of experience in testing avionics or similar equipment is desired.
• Minimum 2 years of experience in the assembly, test, troubleshooting, and repair of digital, analog, and RF circuits to the component level preferred.
• Knowledge of IPC-A-610 and IPC-7711/7721 workmanship standards preferred.

• Must be able to pass a U.S. government background check investigation.
• Proof of U.S. Citizenship or U.S. Permanent Residency is a requirement for this position.
• Lifting of heavy test equipment and systems up to 50 lbs individually.
• Appropriate manual dexterity needed to work with a variety of hand tools.
• Vision correctable to 20/20, with no color blindness or color vision deficiency.
• May involve long periods of standing on one's feet.
• For successful performance of this job, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the general knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.