Apprentice
Listed on 2026-08-05
-
Trades / Skilled Labor
Installation Technician, Electrician/ Electrician Installation, General Labor, Maintenance Technician / Mechanic
Apprentice
This position will be filled as an Apprentice 1st Year - 3rd Year depending on experience.
Apprentice 1st Year:
Under close supervision, as an apprentice in training, must be willing and able to perform the less difficult tasks and assist others in high and low voltage line work involved in the construction and maintenance of electric transmission and distribution conductors, structures, underground systems, and related equipment, and be qualified to do the following and related work as assigned:
- Use pole climbing equipment and have ability to handle self on pole in safe and efficient manner.
- Handle poles, install poles, and assist in the erection of steel, wood and other structures, including foundations.
- Make up and install guys and install secondaries.
- Connect services on energized conductors up to 600 volts.
- Install secondary racks and clevis, anchors, miscellaneous hardware, grounds, fittings for vertical type construction, buss supports, and conductors on dead circuits.
- Perform simple transmission and distribution switching (qualified lineman assistance).
- Tie knots and splice rope.
- Assist in trimming trees.
- Assist qualified lineman or mechanic in simple routine inspection and maintenance.
- Assist in the installation of all types of conduit systems.
- Assist in the handling, moving and installation of all transmission, distribution and plant equipment, machinery, etc.
- Prepare reports and records.
- Read and understand job drawings and maps and assist with Job Hazard Assessment.
- Operate Company's vehicles and equipment
Apprentice 2nd Year:
Under close supervision, must know, understand and be willing and able to apply all applicable Company construction specifications in order to perform the less complicated tasks on high and low voltage line work involved in the construction and maintenance of electric transmission and distribution conductors, structures and equipment, assist in the installation and removal of electric meters, services and related equipment on customers' premises, connect and disconnect service at the pole, locate and repair all types of breaks in the electric transmission and distribution system, answer electric trouble calls to customers' premises, and be qualified to do the following and related work as assigned:
- Install crossarms, secondary racks and clevis, anchors and guys, and install hardware and fittings for vertical type construction, including conductors, single phase transformers, lightning arresters, grounds, cutouts, etc., on dead circuits.
- Trim trees.
- Under close supervision may be allowed to cover and work energized circuits when they and their supervisor are confident that this can be done safely.
- Assist in the installation, maintenance and repair of street lighting equipment and fixtures.
- Direct work of helpers and apprentices as required.
- Refuse transformers and circuit breakers and check grounds.
- Inspect meters and meter loops for irregularities.
- Prepare records and reports.
- Check customer's wiring for accidental ground.
- Check installation for proper secondary ground.
- Replace fuses on customer's premises.
- Execute non-payment disconnects.
- Operate Company's vehicles and equipment.
- Assist qualified serviceman, lineman, or others in working on energized conductors up to 5,000 over 600 volts.
- Handle and work from ladders.
- Assist in the installation, maintenance and repair of street lighting equipment and fixtures.
- Assist in the installation and removal of temporary wiring for equipment.
- Read meters, install and remove secondary meters and services.
- Make secondary load and voltage checks, setting of recording meters and change charts.
Apprentice 3rd Year:
Under close and/or directive supervision, and following prescribed routine and instructions as to methods and working details of average difficulty and importance, must know, understand and be willing and able to apply all applicable Company construction specifications in order to perform the less complicated tasks on high and low voltage line work involved in the construction and maintenance of electric transmission and distribution conductors, structures and equipment, with some latitude for planning or laying out of working details, must be willing and able to perform tasks of average difficulty involved in the installation and removal of electric meters, services and related equipment on customer's premises, connect and disconnect service at the pole, locate and repair all types of breaks in the electric transmission and distribution system, answer electric trouble calls to customer's premises and be qualified to do the following and related work as assigned:
- Use hot line tools under close supervision of qualified workman.
- Under close and/or directive supervision may be allowed to cover and work energized circuits when they and their supervisor are confident that this can be done safely.
- Fuse transformers and sectionalizing fuses.
- String, sag and tie in conductors on dead lines of all classes.
- Install all types of transformer installations, make tap…
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).