PAINTER Jobs

Job Title

Job Description

Duties

• You will troubleshoot to prevent loss of product with short duration curing times.
• You will use pumps and spray equipment such as conventional, airless, air assisted airless, high volume low pressure, electrostatic, electrostatic powder, and plasma powder application.
• You will read, interpret and correctly follow complex written instructions, drawings, specifications, engineering standards, and manufactures' requirements.
• You will plan, organize, coordinate and implement numerous quality-related issues and elements as they relate to the requirements and documentation of critical coated areas.
• You will blast and produce a surface profile ready for coating and build up, fair, shape and level using a variety of knifing and troweling compounds.

Requirements Conditions of employment

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
• This is a bargaining unit position.
• You will be required to lift/carry up to 60lbs.
• You will be required to climb ladders and scaffolding.

Qualifications

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.

Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible.

The Screen-out Element for this position is: ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION

• Experience demonstrating comprehensive knowledge of and experience with principles, techniques, and practices of surface preparation and critical coating application.
• Experience performing accepted surface preparation, coating methods, and techniques such as mixing and application of modem exotic paints and coatings.
• Experience demonstrating skills to blast and produce a surface profile ready for coating.
• Experience applying knowledge of all accepted surface preparation, coating methods, and techniques such as mixing and application of modern exotic paints and coatings.
• Experience coating materials and matching tint and tone have required skill to apply paints at required mil thicknesses.
• Experience understanding trade terms and knowing trade measurements of critical coatings.
• Experience reading, interpreting, and correctly following complex instructions, drawing, specifications, engineering standard, and manufactures' requirements.