Gear Inspector

Overview

Perform a variety of visual and dimensional inspections on splines, shafts, gears, and standard machined parts.

• Follow standard methods, drawings, specifications and general instructions to inspect rough and finished dimensions on splines, shafts, gears, and standard machined parts.
• Plan a sequence of inspection operations, select the most effective measuring instruments, and make all necessary calculations to assure a complete check of all dimensions as specified.
• Use precision measuring instruments such as micrometers, vernier calipers, dial indicators, gear measuring wires, sine bars, angle plates, rotary table and other inspection measuring equipment to check parallelisms, heights, widths, depths, concentricities, etc.
• Visually inspect parts for nicks, scratches, burns, dents, and any other surface irregularities.
• Set up and operate various gear and machined parts inspection machines to check gear profiles, backlash, patterns and other specified features, including surface finish and root radius, referring all difficulties to higher grade inspectors.
• Utilize surface temper etch inspection process (Nital Etch) to check for damage caused by grinding or other related machine processes.
• Prepare all necessary inspection reports and complete all other inspection paperwork as required.
• Refer unusual problems to higher-grade inspector or working leader.
• Follow all rules and regulations pertaining to environmental health and safety. Segregate waste material and follow good housekeeping practices.

Work shifts will be 2nd shift or 3rd shift.

• Knowledge of gear tooth characteristics, inspection methods and procedures.
• Ability to make calculations involving shop mathematics and handbook formulas including algebra and trigonometry.
• Experience using precision measuring instruments such as gear measuring wires, micrometers, dial indicators and other inspection equipment.
• Equivalent to 2 years high school plus 2 to 3 years trades training.
• 1 to 3 years of experience.

• Experience with Geometric Dimensioning and Tolerancing (GD&T)
• Prior experience performing inspections in aerospace, defense, or manufacturing.
• Strong documentation and reporting skills with experience using inspection records and quality systems.
• Effectively interact with Engineering, Production and Corrective Action personnel.
• Familiarity with MRB processes, AS9100, and other aerospace quality standards.
• Ability to use precision measurement equipment.
• Read and interpret Engineering drawings.
• CMM experience (Zeiss/Calypso).
• Solumina experience.

Clearance Level: None

Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.