Setup Technician

POSITION SUMMARYSetup and teardown, including all ancillary equipment, of injection molds from the injection molding machines. Care and maintenance of injection molds between production runs.

ELEMENTS RELATED TO THE FUNCTIONPosition Type:
Non-Exempt

Schedule:

Monday – Friday, 2:30pm – 11:00pm; $3.00 Shift Differential

Location:

DEMGY Pacific, LLC, Tacoma WAPHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee regularly is required to stand for 10 to 12 hours; walk; sit; use hand to finger, handle, or feel objects, tools or controls; reach with hands and arms; balance; stoop; talk and hear. The employee will occasionally lift and/or move up to 50 pounds. Specific vision abilities required by the job include ability to see with 20/20 vision to assess cosmetic requirements, close vision, peripheral vision, depth perceptions, and the ability to adjust focus.

APPLICABLE METRICSAdhere to the Demgy Pacific attendance point system

Adhere to the Demgy Pacific job variance to standard metric

Adhere to the Demgy Pacific Safety protocols

Labor reporting percentage (daily avg)
Labor reported within BOM setup times, vs labor outside of setup times (should be a ratio)
Setup completion %. (measure of whether they miss anything and how often – Should be a percentage, measured by a periodic inspection check sheet)
Damaged tooling/equipment on setup or teardown (number of instances).JOB RESPONSIBILITIESSETUP TECHNICIAN IInstall tooling dies (molds) into injection

Verify, molds and ancillary equipment are safely setup and functioning properly

Removal of ancillary equipment from work centers after production runs are complete

Clean molds/equipment and store in a safe protected condition

Use a variety of hand tools in an appropriate and safe manner

Operate a pallet jack Record time spent on tasks

Keep work areas clean and organized

Operate (machines) while caring for equipment and tools

Conduct resin handling, drying, and movement

Material dryer operation and cleaning

Mold heater setup and operation

Verification and documentation of all mold/equipment setup processes

Verification and documentation of all equipment parameters

Operation of injection molding machine in “Setup Mode”Red tag broken or unsafe tools and equipment

Other duties as assignedSETUP TECHNICIAN IIOperate Forklift Train Material Handler (Mold floor)
Train Mold Setup (Level
1)
Issue MRO work orders for damaged/malfunctioning equipment

Installation and verification of position switches on all features of a tool Proper setup of vacuum verification on tooling

Correctly install an additive feeder on an injection molding machine

Effectively “Purge” an injection molding machine following the SOP’s provided

At least 1.5 years at Demgy Pacific, or equivalent manufacturing scenario

Perform simple, Core/Cavity, insert changes

Train Mold Setup (Level
2)
Operate Reach truck

Other duties as assignedEMPLOYEE RESPONSIBILITIES Uphold and comply with Demgy’s Code of Ethics and Conduct Follow safety policies

Contribute to the success of the company’s environmental, health & safety program

Maintain a positive working relationship with co-workers in all departments

Maintain accurate documentation as required, following Demgy Pacific’s document and record control procedures as applicable to the position

Ensure that housekeeping within the department is properly maintained.

Follow Demgy 5S program (workstation organization/locations maintained)
Follow policies outlined in the Employee Handbook Perform other duties as directed by the supervisorJOB SKILL REQUIREMENTSEffective communication:o Able to read and write English.o Able to keep accurate quality records.o Able to basic math (addition, subtraction, multiplication, and division)
Mechanical skills.

Basic computer skills.

Team oriented.

Efficient and action driven.

Motivated self-starter.

Dependable:
Reliable attendance and punctuality.

MINIMUM EDUCATION AND QUALIFICATIONSSuccessful completion or proven prior experience required as a Setup Technician in Injection Molding to qualify to move from Setup Technician I to Setup Technician II to Setup Technician III.Experience in manufacturing, preferred.

Experience in Aerospace, preferred.

High School diploma or equivalent.
#J-18808-Ljbffr