QA​/QC Inspector - Code Compliance

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Full time, located in Mineola, TX.

Salary Range: $24.00 To $27.00 Hourly

Support Morrow Process Solutions’ Quality Management Program by conducting continuous inspection and verification of materials, fabrication processes, documentation, and final deliverables. Ensure all structures, equipment, and piping assemblies are built in accordance with drawings, procedures, codes, and customer specifications.

The QA/QC Inspector will report to the QA/QC Supervisor.

Mineola, TX (Full time, In-person);
Standard Operations at MPS are M-F 7:00AM – 5:00PM (1 hour lunch break). The QA/QC inspector position is allotted a minimum of 40 hours per week, however, the QA/QC inspector must be willing and able to work 50+ hours per week as required to support production and inspection schedules.

As the QA/QC Inspector of Morrow Process Solutions, you serve as the front line of product conformance, validating workmanship, documentation, inspections, and testing throughout fabrication. You ensure that all incoming materials, in-process assemblies, and completed equipment meet drawing, code, and procedure requirements. You maintain inspection records, sign off on controlled drawings, and participate in pressure tests, NDE validation, and paint inspections.

• Verify that Inspection & Test Plans (ITPs) are in place and signed as items are completed.
• Confirm Welder and NDE Personnel Qualifications are current.
• Ensure gauges and measuring devices are calibrated.
• Monitor that Data Books are compiled as progress is made.
• Complete and submit all required Inspection Reports weekly.
• Complete and submit Weekly Inspection Summary Reports.
• Perform physical inspection of received materials (minimum 1% spot check).
• Conduct visual inspection for damage and verify compliance with Purchase Order.
• Perform dimensional checks (Length, Width, Thickness,  & OD).
• Confirm MTRs match Bill of Materials requirements on drawings.
• Complete MPS Receiving Inspection Reports and obtain Vendor Receiving Inspection Reports.

• Perform inspections per ISO for each controlled item and verify correct revision.
• Inspect fit-up for:
  • Gap tolerances
  • Dimensional accuracy
  • Angle / degree compliance
  • Flange one/two-hole orientation
  • Levelness
  • Sign and date drawings after inspection
• Confirm qualified welder and correct weld procedure.
• Inspect weld appearance (undercut, porosity, cold lap, surface defects).
• Verify correct weld size, length, and weld type (Fillet, Butt, Socket).
• Confirm welder stamp is applied to each weld.
• Sign and date drawings upon completion.
• Validate NDE per requirements (RT, MT, PT) and ensure testing is performed.
• Witness pressure testing:
  • Confirm PSI, flange rating, and drawing specifications.
  • Verify correct pressure application.
  • Sign off on Vendor Pressure Test Report.

• Verify paint application:
  • Correct product and color
  • Wet and dry film thickness
• Conduct visual inspection for runs, drips, damage, or light coverage.

• Verify correct packaging and protection of items for shipment.
• Confirm all items on Bill of Lading are listed accurately and accounted for.