Industrial Painter/Sand Blaster/Night Shift/Doe
Listed on 2026-07-01
-
Manufacturing / Production
Maintenance Technician / Mechanic, Welder / MIG/MAG/TIG, Manufacturing & Industrial Operations, Fabrication
Industrial Painter/Blaster
We're seeking an experienced Industrial Painter to apply high-quality coatings to large industrial components such as pipe, valves, and structural skids. This position requires strong knowledge of industrial coating systems, professional spray-gun experience, and the ability to follow precise mixing ratios and application requirements. Candidates must be able to work independently, meet quality standards, and maintain a clean and safe work environment.
Responsibilities:
- Prepare and paint large industrial materials, including pipe, valves, fabricated skids, and equipment
- Use spray guns and conventional paint pots to apply a wide range of industrial coatings
- Mix coatings accurately according to technical data sheets and specified ratios
- Apply zinc primers, epoxies, urethanes, and multi-coat systems
- Use a wet mil gauge to verify proper film thickness
- Perform 3-coat above-ground coating systems (primer, mid-coat, topcoat)
- Apply below-ground coating systems such as SPC-2888 or Denso Protal 7200 (plural component systems)
- Maintain spray equipment, hoses, and pots
- Operate overhead cranes and forklifts as needed
- Keep work area clean and follow all safety, PPE, and quality requirements
Qualifications:
- Minimum 4 years of industrial coatings experience
- Experience painting large industrial components (pipe, valves, skids, etc.)
- Proficient with spray guns and conventional paint pot systems
- Strong understanding of industrial coating systems and mixing ratios
- Ability to measure and verify coating thickness using a wet mil gauge
- Experience with zinc, epoxy, and urethane coatings required
- Below-ground coating experience (SPC-2888 or Denso Protal 7200) a plus
- Overhead crane and forklift experience helpful
- Must be able to pass a paint test: mix per data sheet, set up spray pot, and spray test panel
Schedules:
Train on Day Shift – Monday–Thursday, 6:00am–4:30pm
Move to Night Shift after training – Monday–Thursday, 4:00pm–2:30am
Weekenders – Friday – Sunday 5:30-6:30
Pay: $19–$24 per hour, depending on experience with $2 shift differential once moved to nights.
** SIGN ON BONUS $200**
Abundant Solutions 5151 S Mingo Rd Suite D Tulsa, OK 74146 Send resumes to
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).