Industrial & Marine Automation Training in Kochi, India
IPCS Automation - Automation Training, Kochi:
Ingenious Power & Control Systems Pvt Ltd (IPCS Automation) in Ernakulam - Kochi, in the state of Kerala, is a system integrator for industrial and marine automation and power technologies that provides certified automation and certified embedded training programs. We also conduct various courses for corporate companies and professionals in the areas of Process control, HMI, Drives, Panel Designing, SCADA, PLC, DCS, Embedded, Industrial Networking and electrical controls. IPCS also has locations in Calicut, Kerala, and Navi Mumbai, Maharashtra.
Automation System Engineer - Certified Automation Training:
- Duration: 240 Hours
As the world of automation is expanding day by day, engineers can’t survive without proper training from basic to advanced level. We have developed our syllabus to enable you to become a trained engineer and an industry ready professional. Thus we have developed our training program to equip you with cost effective design skills within the industrial standards.
Program Contents:
- Programmable Logic Controllers (PLC). - Allen-Bradley, Siemens, ABB, GE Fanuc and Telemecanique PLCs
- Supervisory Control And Data Acquisition (SCADA)
- Electrical drives and controls
- Field Instrumentation and Pneumatics
- Distributed Control System (DCS)Human Machine Interface (HMI)
- Human Machine Interface (HMI)
- Control panel designing
Advanced Automation System Professional - Certified Automation Training:
- Duration: 150 Hours
The training program is broadly divided into six sessions. Each session is taken by experts with industry experience. As the world of automation is intensifying as each day progresses, engineers can't survive without proper training from the ground level to the advanced level. Our course is highly practical-oriented, aimed at supporting and encouraging fresh engineers to foray into the automation industry and fine tune each engineer personnel.
Program Contents:
- Programmable Logic Controllers (PLC) - Allen-Bradley, Siemens, ABB, Telemecanique PLCs
- Supervisory Control and Data Acquisition (SCADA)
- Electrical drives and controls
- Field Instrumentation
- Introduction to Distributed Control System (DCS)
- Control panel designing
Certified Embedded Design Professional:
- Duration: 140 Hours
Our training is aimed at engineers practicing embedded software as well as those planning to enter the embedded field. The training presents practical sessions and techniques for use in designing, implementing, integrating, and testing of modern embedded systems. After successfully completing the training, the participant will be proficient in handling Embedded Projects independently.
Porgram Contents:
- MCS–Versions - Assembly Language/ Embedded C
- MICROCHIP – PIC - Assembly Language/ Embedded C
- Real Time Operating System (RTOS)
- ARM Processors / Robotics
Additional Certified Automation Training Programs:
- Advanced PLC Program Professional
- DCS Engineering & Maintenance
- Electrical Control & Panel Designing
- Industrial Networking
Additional Certified Embedded Training Programs:
- Embedded System Design (Crash)
Professional & Corporate Training Programs:
- Process control
- HMI
- Drives
- Panel Designing
- SCADA
- PLC
- DCS
- Embedded
- Industrial Networking
- Electrical controls
 |
See Also:
- About - Location |
|
| Address: BV Complex, CP Ummer Road, Ernakulam - Kochi, Kerala, India | ||
Rajasthan Institute Of Engineering and Technology is a degree-offering technical college in Jaipur, in the Indian province of Rajasthan. We provide a wide range of Bachelor and Masters degree courses in a variety of Engineering & Technology subjects. Courses include Information Technology, Civil Engineering, Business Administration, and Electrinics & Communication among others.Our vision is to create a world class education and training institute that fosters a vibrant community of intellectuals and entrepreneurs. We aim to do this by generating creativity, competence and commitment in order to ensure the sustainable development of society.
The emphasis of our programs is on innovative teaching, continuous monitoring and evaluation through tutorials, laboratory classes and participation in co-curricular activities.
- Computer Science Engineering
- Electronics & Communication
- Electrical & Electronics Engineering
- Electrical Engineering
- Mechanical Engineering
- Civil Engineering
- Information Technololgy
Masters Degree Programs:
- M.Tech in Digital Communication
- M.Tech in Computer Science
- M.Tech in Power System
- M.Tech in Production Engineering
- M.Tech in VLSI Design
- Master in Computer Application (MCA)
- Master in Business Administration (MBA)
Based in Khanna in the Ludhiana district of the state of Punjab in northwestern India, Gulzar Group of Institutes (GGI College) are affiliated to Punjab Technical University, and approved by AICTE (All India Council for Technical Education). The institutes offer a range of bachelor's degrees and master's degree courses in the fields of engineering, computer applications and management, including an MBA degree program.The aim of GGI College is to develop not just top quality engineers but also well developed persons. Our motto therefore is “Sharpening Minds. Brightening Tomorrow” which is the joy of excellence in a world of high technology.
At GGI College, we have much to offer to our student community who come from all walks of life. The Institute not only aims to enrich their academic journey, but also provides you an environment to explore and discover your true potential. We continue to build a multicultural student and academic community, as it is a vital component in an excellent education system. We aspire that all students leaving the Institute take their places in the global community.
- Master of Business Administration (MBA)
- Bachelor of Business Administration (BBA)
- B.Sc. in Information Technology
- Bachelor of Computer Applications (BCA)
- M.Sc in Information Technology
- Master of Computer Applications (MCA)
Engineering Degree Courses:
- B.Tech (Automobile Engineering)
- B.Tech (Automation and Robotics Engineering)
- B.Tech. (Electronics & Comm. Eng.)
- B.Tech. (Computer Science Eng.)
- B.Tech. (Mechanical Eng.)
- B.Tech. (Civil Eng.)
Geeta Engineering College is ideally located on National Highway (NH-71), at a distance of around 10 kms from the industrial city of Panipat in Panipat district in Haryana State, India. At Geeta Engineering College, we offer a range of bachelor of technology degree programmes in engineering and an MBA programme in management. Geeta Engineering College is AICTE (All India Council for Technical Education) approved and is affiliated to KU (Kurukshetra University).We provide highly qualified and dedicated faculty, an air-conditioned and wi-fi enabled campus, ultra modern labs / workshops with the latest and branded equipments and machinery. We also offer well furnished hostel accommodation for boys and girls. Our college has links with HDFC Bank and PNB to facilitate education loans to students, and we also have placement links with MNC.
Panipat is approximately 90 km north of Delhi. The college campus is beautifully established in the natural green habitat in a cool and calm environment spread over 11 acres of land.
- B. Tech. in Information Technology Engineering
- B. Tech. in Computer Science Engineering
- B. Tech. in Civil Engineering
- B. Tech. in Electronics & Communication Engineering
- B. Tech. in Mechanical Engineering
- MBA in Management
SMEClabs, the research, development and training wing of SMEC Automation has pioneered automation training in India for the last decade and has trained over 4,000 engineering graduates and professionals in marine and industrial automation, helping them achieve greater career success. SMEC Automation has been operating from East Andheri in Mumbai, serving the marine sector for a decade now, and with the introduction of the training facility, it plans to facilitate more growth for the marine automation sector by bringing in more quality engineers in to the industry.SMEC Automation provides specialized technical consulting services and custom engineered products to the marine, energy and offshore industries applying advanced methods and technologies in Mumbai. SMEC Automation is the largest marine automation company in India and is the first Indian Automation company to become ISO 9001:2008 certified.
Students at the Mumbai training facility of SMEClabs avail of the same training modules as availed at all the other PLC, SCADA training facilities of SMEClabs in India. They are trained by experienced engineers of SMEC Automation. We focus on providing practical training to students.
Our courses include detailed training in:
- Programmable Logic Controllers (PLCs)
- Supervisory Control and Data Acquisition Systems (SCADA)
- Variable Frequency Drives (VFDs)
- Human Machine Interface (HMI)
Training programs are 100% practical
Located in Mumbai, India, SVKM'S NMIMS School of Pharmacy & Technology Management provides a wide range of Bachelor, Master, and Ph.D Degree programs in the area of pharmaceutical sciences. Our mission is to produce self-motivated, and self reliant young pharmacists catering to the needs of industry, academia, and research.Since 2006, our school has made significant inroads in the sphere of pharmaceutical education. This has been achieved by outstanding student participation in various activities, supported by a highly-qualified and motivated faculty, and world-class infrastructure.
We believe in the all round development of students, so a variety of teaching aids are used. These include presentations, group discussions, demonstrations, tutorials, and weekly interactions with experts from academia, and the pharmaceutical industry.
- Bachelor of Pharmacy (B. Pharm, 4 years)
- B. Pharm + M. Pharm (6 years)
- B. Pharm + MBA (5 years)
Master of Pharmacy (M.Pharm) Courses:
- Pharmaceutics
- Pharmaceutical Chemistry
- Pharmacology
- Clinical Pharmacy
- Quality Assurance
- Biotechnology
- Pharmaceutical Analysis...
M. Pharm + MBA Courses:
- Pharmaceutics
- Quality Assurance
- Pharmaceutical Analysis
Ph.D Course (3-4 Years)
- Pharmaceutical Sciences
Located right beside Indira Gandhi International Airport of the outskirts of New Dehli, the National Institute of Aeronautical Engineering Research & Management provides quality Degree and Diploma courses in a wide range of Engineering and Management fields. Courses include Mechanical, Civil, and Electrical Engineering as well as Bachelor (BBA) and Master (MBA) of Business Administration programs.We are committed to providing high quality education, training, and expertise. We aim to enhance the intrinsic abilities of our students, and to promote their management and technological skills.
Our mission is to transform the youth into high caliber professional engineers that can meet the challenges of the highly competitive world through intensive training. We offer appropriate guidance and discipline with human values and a holistic approach in order to utilize the knowledge of engineering & technology for the welfare of the society.
- Aeronautical Engineering
- Mechanical Engineering
- Civil Engineering
- Electrical Engineering
- Computer Engineering
- Information Technology
Engineering Diploma Courses:
- Computer Engineering
- Electronic and Telecommunication Engineering
Management Degree Courses:
- BBA (Bachelor of Business Administration)
- MBA (Master of Business Administration)
- BCA (Bachelor of Computer Applications)
- MCA (Master of Computer Applications)
| Search schools here by state/city for Alabama, Arizona-Phoenix, Arkansas, California-LA County/Bay Area, Colorado-Denver, Florida-Miami-Dade, Georgia-Atlanta, Illinois-Chicago/Cook County, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maryland, Mass-Boston, Michigan, Minnesota-Minneapolis, Mississippi, Missouri-St Louis, Nevada, New Jersey, New York, North Carolina, Ohio-Cleveland, Oklahoma, Oregon-Portland, South Carolina, South Dakota, Pennsylvania-Philadelphia, Tennessee, Texas-Houston/Dallas, Utah, Virginia, Washington-Seattle, Wisconsin-Milwaukee & more... Search career colleges in Canada by province/city in Abbotsford, Burnaby, Kelowna, Surrey, Victoria, Vancouver, BC, Hamilton, Kitchener, London, Ottawa, Toronto, Ontario, Calgary, Edmonton, Alberta, Winnipeg, Manitoba & more... |
||||
|
||||
|
© 2003-2026 Learn4Good Ltd: Site listing Education Programs, Career Training & Jobs worldwide.
|
||||